The PM06 V2 is a cut down version of Holybro’s Full-Size PM07 power management board, making it suited to smaller platforms, for example racing drones. This is the 14S version of the PM06, the standard PM06 V2 supports up to 10S input.
Like the PM07, this power board serves the purpose of providing a stable power supply along with voltage/current monitoring to compatible flight controllers such as the APM, Pix32, Pixhawk, Pixhawk Mini, Pixhawk 4 or Durandal. It also functions as a power distribution board for connecting speed controllers too and includes a XT60 pigtail cable for connection with a battery. The board accepts an input power supply of 7-58V (Up to 14S LiPo) and outputs 5volts at 3amps. The board has a current rating of 120amps, which is split between four power output pairs, so suited to quadcopters. Lastly, there is a LC filtered output, which can be used to provide a clean power supply to FPV equipment.
PX4 QGroundControl Setup
Connector the Power Module to battery and connect the flight controller to your ground station via USB.
Open QGroundControl go VehicleSetup and Power tab and Input the Number of Cells.
Ensure the Voltage Divider & Amps per Volt is correct.
For more information with setting PX4 with QGround Control, refer to the PX4 Guide.
Ardupilot Mission Planner Setup
Connector the Power Module to battery and connect the flight controller to your ground station via USB.
Open Mission Planner, go to Setup page and Battery Monitor tab and select the following:
Monitor – “Analog Voltage and Current”
Sensor – “9: Holybro Pixhawk 4 PM”
For Pixhawk 4, Pixhawk 4 Mini, Pix32v5, Pix32, select the following:
HW Ver – “0: CUAV V5/Pixhawk 4 or API “
Alternatively, input the following in the parameter list
BATT_VOLT_PIN: 0
BATT_CURR_PIN: 1
For Durandal, select the following:
HW Ver – “9: Durandal/ZealotH743”
Alternatively, input the following in the parameter list
BATT_VOLT_PIN: 16
BATT_CURR_PIN: 17
For Pixhawk 5X
You will need to use a digital power module like the that end with a “D” such as the PM02D.
For more information regarding setting up Power Module with Mission Planner. Please refer to the Ardupilot Wiki Page.
Current Rating
The XT60 plug and 12AWG wire that PM06 comes with are rated for 30A continuous current and 60A instantaneous current (<1 minute). If a higher current is being used, the plug type and wire size should be changed accordingly. The specifications and models are as follows:
Plug Specification
Wire Size
Rated current: (4 hours, temperature rise <60 Deg C)
Burst Current: (1 minute, temperature rise <60 Deg C)
XT60
12 AWG
30A
60A
XT90
10 AWG
45A
90A
XT120
8 AWG
60A
120A
Specification
Input voltage: 2S-14S
Power Module rated current: 60A
Power Module max current: 120A (<60 sec)
UBEC output: DC 5.1V~5.3V
UBEC output current: 3A Max (Note: To ensure proper heat dissipation, UBEC output current needs to be limited to <2A when using 14S battery.)
Be the first to review “Holybro PM06 V2-14S Micro Power Module” Cancel reply
Shipping
SHIPPING & DELIVERY
We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the size/weight and shipment location. We process orders Monday to Friday and pride ourselves on our quick turnaround of orders - most UK orders will arrive the next day.
We are partnered with several delivery companies including Royal Mail, DHL, UPS and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us.
A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.
Order before 4PM for same day dispatch with Royal Mail, 2PM for next day delivery with DHL and 1PM for next day delivery with APC.
We offer FREE Shipping on UK orders over £99, weighing less than 1kg.
The courier options deliver Monday to Friday, Royal Mail delivers to residential addresses on Monday to Saturday.
For small low value orders our cheapest delivery service is Royal Mail First Class. For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options.
International Postage
Order before 4PM for same day dispatch with Royal Mail.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
DHL Express offers NEXT DAY delivery to most European destinations and a very fast delivery for countries further afield, generally 2-3 days.
Orders shipped outside the EU may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.
Reviews
Clear filtersThere are no reviews yet.