Discontinued: Jumper T Pro V2 ELRS 915MHz 1000mW Radio Transmitter

Product Discontinued – 2025

This is the 915MHz version of the Jumper T Pro ELRS radio. In comparison to a 2.4GHz ELRS, 915/868MHz will achieve even greater range and has better signal penetration through trees, walls and other obstructions. Please note this TX won’t bind with a 2.4GHz ELRS receiver, it must be a 915/868MHz receiver.

The Jumper T-Pro V2 is a gamepad style controller with many of the features found in bigger radios. This includes running OpenTx firmware, support for 16 channels of output, a 3.5mm trainer port, precise hall sensor gimbals and a good range of auxiliary control buttons, including a 6 push buttons located on the top side of the radio which would be useful to ArduPilot users for controlling flight modes. There’s also an internal speaker and haptic feedback built-in which can be configured to provide voice / vibration status alerts like low voltage warnings / flight mode selection etc. The radio is powered from two 18650 cells (not included) and can be recharged via its USB-C connector. Incidentally the USB-C can also be used to connect the radio to flight simulators should you wish to get even more use out of the radio. Lastly, the radio comes with a module bay adapter which supports expansion via the “Lite” socket – compatible with nano-size modules including the TBS crossfire or Tracer Nano modules etc. Overall this radio offers amazing value and features for a radio that can fit just about any field bag. Talking of bags, the radio even comes complete with its own carry case!

V2 Edition – Now with an OLED screen, the addition of two new self-locking buttons and internal memory which replaced a conventional SD card, greatly increasing the reliability of the radio.

Features:

• ELRS: Internal ExpressLRS 915MHz module 1000mW 30dBm output
• OpenTX / Edge TX firmware compatible
• Hall sensor gimbals
• ELRS Nano / TBS CRSF Nano compatible module bay on rear side.
• USB-C internal charging
• Up to 16 channels of output (depending on the receiver)
• Wide voltage input (2pcs 18650 recommended)
• Vibration reminder function
• Support telemetry (depending on the receiver)

IMPORTANT: The use and operation of this product in your country may require a radio license, and some countries may forbid its use entirely. RadioMaster have not created an ‘LBT’ firmware for the Bandit Tx, so while you can use it on 868MHz frequency, it is NOT Legal to use in the UK. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Flying Tech Ltd cannot be held responsible for your actions if you purchase and/or use this product in violation of your government’s regulations.