Happymodel Mobula6 ELRS Brushless Whoop (2.4Ghz/868Mhz)
£83.50 Inc. VAT
This is the ExpressLRS version of HappyModel’s popular Mobula6 Tiny Whoop.
This is the ExpressLRS version of HappyModel’s popular Mobula6 Tiny Whoop. ExpressLRS is an open source RC system that has the characteristics of low latency and a high packet rate.ย Its link quality is very reliable and provides excellentย range,ย think TBS Crossfire,ย but a more budget version. There are two versions of theย Mobula6 ELRS.ย One option is fit with aย 868Mhzย ExpressLRS Serial-basedย receiver and the other a 2.4GHz ExpressLRS SPI receiver (868Mhzย generally has better signal penetration /ย 2.4ghz has lower latency and a smaller antenna, but ultimately both are incredibly fastย and will exceed the FPV range).ย For both options you will need a radio that supportsย ExpressLRS, this probably means buying a module as most radios including radios like the RadioMaster TX16Sย don’t support this protocol as standard.
In addition to the change of receiver, this version of the Mobula 6 is fit with HappyModelโs new 0702 26000KV brushless motor, which is one of the lightest 1S motors on the market. This new motor is also matched with a different prop, a HQProp 31mm Bi-blade.
We think this new version of the Mobula6 is going to be really popular. Previously range has always been an issue with Tiny Whoops, so now thanks to the ExpressLRS receiver you can enjoy this Mobula 6 without having to worry about the failsafe kicking in.
Features
- AIO Flight controller with ELRS Receiver and 5.8G VTX
- Super light 1S 65mm Brushless whoop,ย only 18.7g
- Equipment with the lightest brushless motors-SE0702 only 1.46gram
- Runcam Nano3, the lightest 1/3 CMOS 800TVL Camera
- Smooth and powerful
- Compatible for 1S Lipo/LIHV
- Includes batteries and charger
Receiver options:
- 2.4GHz ExpressLRS SPI receiver
- 868MHz ExpressLRS Serial-based receiver
| Version | 2.4GHz ELRSย | 915MHz ELRS | 868MHz ELRSย |
| Color | Green | Blue | Blue |
| Flight controller | ELRS F4 2G4 | CrazyF4 ELRS | CrazyF4 ELRS |
| Firmware target | CRAZYBEEF4SX1280 | CRAZYBEEF4DX | CRAZYBEEF4DX |
| Built-in ExpressLRS receiver | SPI 2.4GHz | Serial-base 915MHz | Serial-base 868MHz |
| Built-in Dshot ESC | 5A | 5A | 5A |
| Receiver antenna plug | SMD ceramic antenna | IPEX MHF3 | IPEX MHF3 |
| Onboard VTX power | 25mw~200mw | 25mw~200mw | 25mw~200mw |
| Brushless Motor | 0702 KV26000 | 0702 KV26000 | 0702 KV26000 |
| Propeller | HQPROP 31mm Bi-blade | HQPROP 31mm Bi-blade | HQPROP 31mm Bi-blade |
| Battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery | 1s 300mah Lipo battery |
Motor:
Model: SE0702 KV26000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:ฮฆ1mm
Motor Dimension(Dia.*Len):ฮฆ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only
Propellers:
HQprop31mmx2
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.2g
Flight Controller:
ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in ExpressLRS 2.4G/915MHz/868MHz receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3ย seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RFย Frequency: 2.4GHz
Antenna : SMD antenna
Telemetryย outputย Power:ย <12dBm
Receiver protocol: SPI ExpressLRS
Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible
Onboard Serial-based ELRS Receiver
Operationย current:ย ~100Ma
Rxย Toย FCย protocol:ย CSRF
RFย Frequencyย optional: 915mhz or 868mhz(EU)
Antenna connector:ย IPEX4
Telemetryย outputย Power:ย <17dBm
Firmware target: Happymodel_RX_ES915RX
Receiver protocol: CRSF
Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware)
Firmware flash via Betaflight pass-through
Onboard 5.8gย VTX
Output power: 25mw~200mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band
Smartaudio ready
Runcam Nano3
Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens: 2.1mm(M8) FOV 160ยฐ
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo Battery
Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8g
Connector: PH2.0
Included
- 1x Mobula6 1S FPV Racing Drone
- 4x 1S 300mAh 30C Lipo Battery
- 1x 1S Lipo/LIHV USB Charger
- 1xย Propeller disassemble Tool
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
SHIPPING & DELIVERY
We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the size/weightย and shipment location. We process orders Monday to Friday and pride ourselves on our quick turnaround of orders - most UK orders will arrive the next day.
We are partnered with several delivery companiesย including Royal Mail, DHL, UPS and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection pleaseย contact us.
A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
Shipping to the UK
- Order before 4PM for same day dispatch with Royal Mail, 2PM for next day delivery with DHL and 1PM for next day delivery with APC.
- We offer FREE Shipping on UK orders over ยฃ99, weighing less than 1kg.
- The courier options deliver Monday to Friday, Royal Mail delivers to residential addresses on Monday to Saturday.
For small low value orders our cheapest delivery service is Royal Mail First Class.ย For a guaranteed next day delivery we recommendย Royal Mail Special Delivery orย one of our courier delivery options.
International Postage
- Order before 4PM for same day dispatch with Royal Mail.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- DHL Express offersย NEXT DAY delivery to most Europeanย destinationsย and a very fast delivery for countries further afield, generally 2-3 days.
Orders shipped outside the EU may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.
You may also like…
Related products
Reviews
Clear filtersThere are no reviews yet.