Strobon Standalone Rechargeable LED Strobe Light
£12.50 Inc. VAT
The original Strobon Standalone LED Strobe. A self-contained, rechargeable nav light for your drone or RC model.
We absolutely love these strobon Standlone LEDs. They are incredible bright and so easy to use. They have their own battery pack so there is zero wiring needed to install them. The battery is rechargeable from a USB power connection and fully charged they will run for a massive 5 hours, so you won’t be charging them very often. They only weigh 4grams so they can be glue or Velcroed to your aircraft, we like the velcro options as it means they can be quickly removed for easy charging and can also be moved to other aircraft. They are particularly suited to enclosed multirotors like the DJI Phantom / Inspire, 3DR Solo, Yuneec and Walkera drones.
The Strobons are available in four colours white, red, green and blue. All flash in a strobing pattern.
Warning, these lights are seriously bright, we wouldn’t recommend looking directly at them close-up, they are blinding!
If you would prefer to hardwire the Strobons, there are the Stobons V2s, which feature multiple flashing modes and RC control.
Features:
- 5 hours continuous operation with onboard battery.
- Powerful 3W LED
- No cabling required
- Easy to use single button interface.
- On board battery status and charge indicator system.
- Compatible with all 5V MicroUSB cables and chargers.
- Battery with internal overcharge and discharge protection.
- Contact Pads (L+ and L-) for the external LED support.
The Strobons are rechargable via USB, we sell a wall socket USB power supply and a useful 4x USB charging cable.
15° to 100° Clear Lenses – Here
Usage:
- BATTERY STATUS: Press the button then release to learn battery status when it is OFF.
(1 blink: Need Charge, 2 blink: It’s OK, 3 blink: Fully Charged) - ON/OFF: Press and hold the button for 3 seconds to turn ON or OFF
- CHARGE: Plug it to any micro USB charger or computer port when charging required.
– The LED will blink with very short bursts when charging.
– The LED will blink with 1 second ON / 2 seconds OFF pattern when the battery is fully charged.
It takes 2 hours for empty batteries.
Notice: The battery includes it’s own PCM module. This module protects the battery from overcharge and discharge for long lifespan. If there is no life sign on the circuit when you press the button, the discharge protection function has probably activated because of low battery voltage. Just charge it and try again.
This product is compatible with latest FAA and CAA anti collision lights rules for drones. It’s visible from 3 miles away at night.
- Current Consumption: <15mA per hour
- Charge Port: MicroUSB
- Charge Current: 40mA max.
- Charge Time: ~2 hours
- Battery Type: 70mA LiPo Battery with safe and reliable PCM circuit.
- Dimensions: 22x18x10mm
- Weight: 4gr
Included:
- 1x Standalone LED Strobe Light
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
How to light your multirotor: Lighting is obviously a necessity for nighttime flying, however it’s also really helpful when flying in daylight. Unlike helicopters, multicopters typically lack defining features to help with orientation; lighting is therefore a great solution. It makes most sense to employ a navigational lighting setup – Red on the Port (left) side, Green on the Starboard (right) side and a white strobe astern. When it comes to selecting your lights there are lots of options: LEDs, HPLEDs (High power LEDs), Strip lights and Strobes. Regular LEDs are inexpensive and come in an array of colours. While they consume little power, LEDs are best suited to nighttime applications as they are usually too dim to be seen in bright daylight. Alternatively the next generation of LEDS, namely HPLEDs and CREE LEDs are much brighter. They can be driven by much greater currents meaning that some can emit over 1000 lumens. At night they can be seen for miles, but more importantly they are visible in bright daylight. Since overheating is destructive, HPLEDs must be mounted on a heat sink to allow for heat dissipation. Both regular and HP LEDs are easy to wire up – however note that LEDs will only light up with correct electrical polarity and that they have a maximum current rating which must not be exceeded. To limit the amount of current through an LED a suitable resistor should be used. Strips lights are fun when it comes to night flights and are fantastic for orientation purposes. Some can be powered/controlled with an LED RGB Driver to cycle between different modes and colours. LEDs of all types can be turned into a strobe by using a suitable controller, strobes have the added bonus of low power consumption. The key to all lighting installations is to think about voltage and current requirements, a voltage regulator/UBEC will usually be necessary to help meet this requirements. Finally it is advisable to power lights from a separate battery to your flight battery.
Flytron is a UK company specialising in the design and manufacture of small RC electronics.
They make an excellent range of navigation and anti-collision light solutions for drones and model aircraft.
Best Sellers: Strobon Standalone, Strobon Standalone Cree, Strobon V2, Strobon V2 Cree.
SHIPPING & DELIVERY
We are based in the UK and ship to most destinations worldwide.
We dispatch orders during the times shown on our Dispatch Schedule. Orders placed before the daily dispatch cutoff will ship the same day (subject to stock availability). Orders placed after the cutoff will ship on the next scheduled dispatch day.
A confirmation email is sent once your order has been packed. If you need to amend your order, please contact us as soon as possible — once shipped, we’re unable to make changes.
We work with trusted delivery partners including Royal Mail, DHL, UPS, Fedex and Parcelforce. If you have a delivery requirement or would like to arrange collection, please get in touch.
Next Dispatch: Mon 16 Mar
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
Shipping to the UK
- Order before the daily dispatch cutoff for same day dispatch.
- FREE delivery available on qualifying orders over £99 (under 1kg).
For small, low-value orders, Royal Mail First Class is our most economical option. Royal Mail Tracked 24 is the most popular choice, offering full tracking and flexible delivery options. For guaranteed next working day delivery, we recommend Royal Mail Special Delivery.
Royal Mail delivers to residential addresses Monday to Saturday, while courier services (including DHL) typically deliver Monday to Friday.
International Postage
- USA orders: Import duties and taxes are prepaid by us — no additional customs charges on delivery.
- Other destinations: Customs duties or import taxes may apply and are the responsibility of the recipient.
Smaller, lower-value orders may be sent via Airmail or tracked postal services. Economy road and express air courier options are available depending on destination. For faster delivery, we recommend express air courier services such as DHL Express, which typically deliver within 1–2 working days across Europe and a few working days for most other destinations.
You may also like…
Related products
Reviews
Clear filtersThere are no reviews yet.