The FrSky Wireless USB Dongle allows you to connect your FrSky transmitter with a PC or Mac computer to use a flight simulator. Just install the pre-loaded HID driver to your PC (Mac users will need to download the correct HID drivers) and then bind your transmitter to it like you would do with a new RC model.
XSR-SIM is now coming installed with ACCST 2.0 firmware. This is not compatible with ACCST 1.0 controllers and firmware updates will be required if there is a firmware mismatch.
Tip: Find out what version is running on your radio, this is done by going to the “Module / RX Version Page“. On a QX 7 / X9D radio this is done by holding Menu button to go into the Radio Setup Menu, press page button until “Version” menu shows, scroll to ‘Modules / RX Version” and press enter. If you need ACCST 1.0 we also sell this but charge a little more as we have to re-flash the XSR-SIM. You can also do this yourself using our download – HERE.
Features:
- Compact design
- Low power requirements: Typically 55mA
- Compatible with FrSky transmitters and module systems (Mode D16)
- Compatible with popular simulators (DRL, LiftOff, Freerider, HotProps,)
- 8 proportional channel and 8 switch channel output (set on the transmitter side)
- Firmware upgradable (through the S.Port)
Reviews
Clear filtersThere are no reviews yet.