FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

Gemfan Flash 7040 Tri-Blade Props for Kopis Cinematic X8

Gemfan Flash 7040 Tri-Blade Props for Kopis Cinematic X8

£3.90
This is the stock prop for the Kopis Cinematic X8 Octocopter Frame. Gemfan 7040 3-blade Flash Propellers have been specifically designed for high-speed racing yet can also suit a long-range rig looking for efficiency and increasing flight times. The inverse tip design helps to reduce blade tip vortex and the lightweight of the propeller means it has a smaller moment of inertia and fast response time. This propeller has an excellent smooth and steady performance in high-speed flight.
Brand: 
Gemfan
Collection: 
Frames, Props & Parts
Category: 
Propellers

Gemfan Hurricane 4023 Tri-Blade Props for Kopis Freestyle

£3.50
This is the stock prop for the Kopis Freestyle 4inch Drone. Get the max performance while staying under that magical 250g mark! Power, control, and speed are what you get with Gemfan's Hurricane 4023 Durable micro Props! The 4023 Gemfan props come in a set of 4 with a 3-blade style and a 1.5mm and 5mm center hub using Gemfan's innovative adapter.
Brand: 
Gemfan
Collection: 
Frames, Props & Parts
Category: 
Propellers
Gemfan D63 5 Blade Cinewhoop Props (1.5mm) - Clear Grey

Gemfan D63 5 Blade Cinewhoop Props (1.5mm) - Clear Grey

£3.50
This is the stock prop for the Holybro Kopis CineWhoop 2.5inch. The Gemfan D63 5-blade propeller is a great choice for cinewhoop drones, it offers more stability and thrust. More blades and less pitch result in better accuracy and maneuverability with less noise. They are sold as a pack of four props, 2x CW and 2x CCW.
Brand: 
Gemfan
Collection: 
Frames, Props & Parts
Category: 
Propellers
Gemfan 31mm 3-Blade Propeller Set for Mobula6 (1MM HUB)

Gemfan 31mm 3-Blade Prop Set for Mobula6 (1MM HUB)

£2.50
These Gemfan 31mm 3-Blade propellers will take your micro drone to the next level! Its aggressive blades provide great thrust and fast acceleration. These props are used by the Mobula6 / Mobula6 HD micro drone. They fit motors with a 1mm shaft, typically 0703-1103 brushless but can also work with brushed motors as well. They are sold as a pack of four props, 2x CW and 2x CCW.
Brand: 
Gemfan
Collection: 
Frames, Props & Parts
Category: 
Propellers
Gemfan FPV Racing Pop Up Cube Air Gate 3 75CMX75CM

Gemfan FPV Racing Pop Up Cube Air Gate 3 75CMX75CM

£29.99
Setting up a FPV racetrack has never been easier with the Gemfan Airgate Cube 3. It unfolds within seconds,  so you'll be ready to start racing in no time. Being a cube it can be used on a multi-directional track and you can also use it as a dive gate. The gate has been designed with a vivid colour scheme and red trim that makes it very visible from all sides. Finally, when you have finished flying, the gate packs down to a very portable 35cm x 35cm carry bag. The gate measures 75cm by 75cm so it's perfect for indoor whooping or for extremely skilled 5" race pilots. New pop-up design for easy setup and good portability. Strong and durable. Robust fabric resists impacts. Suitable for both indoor and outdoor use. Red corner trim to make it more visible.
Brand: 
Gemfan
Collection: 
Accessories
Category: 
FPV Racing Track Equipment
Gemfan FPV Racing Air Flag - 340cm

Gemfan FPV Racing Air Flag - 340cm

£34.99
Now you can make your own FPV racetrack with this highly visible FPV Racing Air Flag from Gemfan. It will provide a challenging obstacle to fly around and practice you skills and is the perfect companion to the Gemfan Air Gate. They are affordable, quick and easy to set up and an eye-catching marker for any FPV track. The flag is made of a strong polyester fabric printed with the Gemfan logo and is robust enough for outside use in most weathers. The supporting pole has 2 aluminium poles for the bottom 2/3rds and the top pole is made of fiberglass with a steel support ferrule for strength.  The flag has a total pole height of 340cm with a flag length of 310cm. Each flag comes with a very substantial metal pin to hammer into the ground and this has an offset swivel for the flagpole to attach to. The flag is also supplied with a strong lightweight carry case with the Gemfan logo for easy storage and transportation.
Brand: 
Gemfan
Collection: 
Accessories
Category: 
FPV Racing Track Equipment
FPV Race Gate

Gemfan FPV Race Gate - 270cm

£25.00
This highly visible FPV Racing Air Gates from Gemfan are very affordable, quick and easy to set up and add a great challenge to any FPV track. The gate is made of a strong polyester fabric printed with the Gemfan logo and is robust enough for outside use. The supporting pole is made of fiberglass with steel joining ferrules similar to those used in dome tents. The poles are also fitted with an internal elastic band which allows the poles to be plugged and unplugged quickly for quick and easy setup/take down. The gates are designed to have a width of 270cm and a height of 150cm high (inside of the fabric) but of course this can be adjusted to suit your particular course. Each gate comes with pegs and guy ropes and an adjustable cross strap which guarantees a wind and crash resistant mounting. The gate is also supplied with a strong lightweight carry case with the Gemfan logo for easy storage and transportation.
Brand: 
Gemfan
Collection: 
Accessories
Category: 
FPV Racing Track Equipment
Subscribe to RSS - Gemfan