V2 Edition – Now with an OLED screen, the addition of two new self-locking buttons and internal memory which replaced a conventional SD card, greatly increasing the reliability of the radio.
The Jumper T-Pro V2 is a gamepad style controller with many of the features found in bigger radios. This includes running OpenTx firmware, support for 16 channels of output, a 3.5mm trainer port, precise hall sensor gimbals and a good range of auxiliary control buttons, including a 6ย push buttons located on the top side of the radio which would be useful to ArduPilot users for controlling flight modes. There’s also an internal speaker and haptic feedback built-in which can be configured to provide voice / vibration status alerts like low voltage warnings / flight mode selection etc. The radio is powered from two 18650 cells (not included) and can be recharged via its USB-C connector. Incidentally the USB-C can also be used to connect the radio to flight simulators should you wish to get even more use out of the radio. Lastly, the radio comes with a module bay adapter which supports expansion via the “Lite” socket – compatible with nano-size modules including the TBS crossfire or Tracer Nano modules etc. Overall this radio offers amazing value and features for a radio that can fit just about any field bag. Talking of bags, the radio even comes complete with its own carry case!
Theย Jumper T Pro V2ย Radio Controller comes in two versions:ย A Multi-Protocol and a ELRS 2.4G version.ย Be sure to choose the correct RFย version:ย Theย 4-in1ย Multi-Protocol versionย supportsย protocols including FRSKY ACCST, Spektrumย DSMX and FlySkyย ADHDS 2Aย etc. The ELRS version, supports 2.4GHzย ExpressLRS protocol only.
Features:
- 4in1 Version: Internal JP 4-in-1 Multi-protocol module supports:ย DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsanย etc
- ELRS Version:ย Internal ExpressLRS 2.4G module 1000mW 30dBm output
- OpenTX / Edge TX firmware compatible
- Hall sensor gimbals
- ELRS Nano / TBS CRSF Nano compatible module bay on rear side.
- USB-C internal charging
- Up to 16 channels of output (depending on the receiver)
- Wide voltage input (2pcsย 18650ย recommended)
- Vibration reminder function
- Support telemetry (depending on the receiver)
- LUA Script support: Yes (JP4-in-1 Multi-protocol)
Reviews
Clear filtersThere are no reviews yet.