FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

TBS Team BlackSheep Soft Silicone Motor Mounts 1mm 9pcs

TBS Soft Silicone Anti Vibration Drone Motor Mounts - 9pcs

£4.90
Solve high-frequency oscillation problems on your quad by filtering low-frequency noise out before it gets to your flight controller. These TBS Anti-vibration motor mounts are for 2204 to 2208 size motors with a 16mm to 19mm mount pattern. SOFT MOUNTING - THE THEORY The transition between hard and soft materials provides vibration absorption. By squeezing a soft piece of silicone between the motor and the frame, certain vibration frequencies will get attenuated. Without soft mounting the vibration noise may saturate the gyro reading, making it impossible for the gyro to distinguish signal from noise. The end result is high frequency shakes or spastic movements of your quad - either at full throttle or mid throttle - that remain regardless of your PID values. In most cases, soft-mounting the flight controller or motors will get rid of these issues. With the TBS soft-mount silicone kit, you'll get everything necessary to improve the flight handling of your quads. CAVEATS When soft-mounting, you need to be aware of the advantages as well as the disadvantages. In essence, soft-mounting is a vibration filtration technique. Every kind of filtering introduces latency. By allowing the motors to move just a tiny bit, we create a slower response from the quad. It will manifest itself as a "smoother" response to your control inputs, but also mean that your muscle-memory may need to go through some minor re-adjustment. The downsides can be considered minimal, just don't expect to have your cake and eat it too, is what we're saying.
Brand: 
2018 TBS Squad Cap

TBS Black Sheep Squad Cap

£22.00
Protect yourself from the sun while looking snazzy! The BlackSheep Squad snap-fit caps are here. Made in a very reputable factory with only the highest quality materials, fully customized for TBS.  Logos are embroidered. Front includes the BlackSheep Squad logo and wording, side includes the TBS logo, and the rear a shout-out to the TBS website.
Brand: 
Collection: 
TBS Caipirinha 2 FPV Flying EPP Wing - RTF PNP

TBS Caipirinha II (V2) FPV Flying Wing - KIT & RTF PNP Versions

£231.90
Pre-Order Now. Stock Due Early January Note: This is a preliminary launch with no manual, promotional fireworks video. Suggested for wing experts or people willing to google only! We're incredibly excited to announce the TBS CAIPIRINHA II - the wing that puts your piloting, pronounciation and spelling skills to the test! :) It's a gentle long range cruiser that turns into a fierce mountain diver with just a slight push on your pitch stick.  The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable. The PNP kit from TBS is equipped with high quality, digital metal gear servos, a CP2814-1150kV Cobra motor, 50A HobbyWing ESC and high quality Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!  KIT version is barebones wing version with all hardware. No electronics included except for the PDB. We can confidently say it's going to be the only long range cruiser you will ever need, and the only flying wing in its weight class with such a performance envelope.  FEATURES Small, lightweight, fly anywhere design Ultimate in flight stability and endurance Virtually indestructible EPP/Plywood construction Pre-cut camera, servo, battery, R/C receiver and video transmitter slots 2x push-to-open equipment bays for R/C and FPV electronics Pre-cut, sanded and covered ultra-lightweight elevons & pushrods PNP KIT CONTAINS: CAPIRINHA 2 with all hardware accessories 2x Digital MG Servo 6kgf/cm, 5-6V CP2814-1050kV Cobra Motor 50A HobbyWing Skywalker Wing ESC Aeronaut 10x6 folding prop with prop assembly (CNC aluminum) Everything prepared as far as possible. Final assembly time around 2 hours. HARDWARE KIT CONTAINS: CAPIRINHA 2 Hardware - No electronics included except for the PDB. RECOMMENDED FPV AND RADIO EQUIPMENT FPV camera: TBS ZeroZero II or TBS69 Video transmission: 5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO 2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx Crossfire Micro Rx or Diversity Rx
Brand: 
Collection: 
Category: 

Title

TBS Diamond Antenna for Crossfire TX (868-915MHz)

£24.95
THE CROSSFIRE TX ANTENNA TO RULE THEM ALL! Antenna orientation, wear & tear and non-directionality have been the source of some range issues with our long range and miniquad pilots. We therefore sat down with IBCrazy and he designed this antenna to be as durable as possible. A diamond lasts forever! MORE RANGE With a slight directionality to give you more range when flying in front of you, but still maintain a solid link when flying behind you. The antenna uses the ground you are standing on to reflect and therefore boost your signal out beyond what traditional antennas can manage.  FROM THE MAN HIMSELF "The story behind the Diamond antenna: A few pilots were experiencing drop-outs at what seemed to be random times. I investigated 4 cases an found that all the dropouts were happening all at the same relative azimuth. It was apparent that conductive ground was causing a null between the 0-5 and 15-20 degree azimuth. This wasn't a Crossfire problem at all, it was a problem with the ground they were standing on! To fix this, I designed an antenna that not only would resist the effect of ground, but would track along the ground for low altitude flying. To do this a balanced closed loop structure was needed. The result was the TBS Diamond antenna." -- Alex "IBCrazy" Greve, Dec 9th, 2017` Designed by and manufactured in cooperation with Video Aerial Systems, IBCrazy. 
Brand: 
Collection: 
Category: 
TBS RaceTracker LED Gate Interface / WS2812B LED Driver - XT60 Input

TBS RaceTracker LED Gate Interface / RGB LED Driver

£6.95
The TBS RaceTracker LED Gate Interface transforms any WS2812B RGB LED strip into a "Smart Gate". When connected to your TBS RaceTracker it will dynamically color the LED gates according to the TBS frequency/color scheme, and it will show other things like race start/stop, gate lock/unlock, fastest lap, etc. Supports multiple pilots for a single Race Tracker as well using the latest firmware upgrade! The best use-case for this is to have a start/finish gate that dyanmically shows spectators the above race parameters without having to sift through "standings tables". With a few of these hooked to Race Trackers you could even animate your entire course! Since it works with pretty much every LED strip out of the box, the only limit is your imagination. The deivce is compatible with the TBS Micro Racing LED Gates and also any WS2812B RGB LED Strip.
Brand: 
Collection: 
Team BlackSheep LED Micro Racing Gate - Spare Gate 1Pc

Team BlackSheep LED Micro Racing Gate - Spare Gate 1Pc

£18.00
We love the TBS Tiny Whoop Racing Gates, they can be used to turn any bedroom into an epic-racing track for your Tiny Whoop. For even more fun, you can now extend your track by adding further gates. This is a genuine TBS spare gate, note that you will need to purchase the TBS LED controller to use it and the TBS gate mounts are available separately.
Brand: 
Collection: 
Team BlackSheep TBS Tiny Whoop LED Racing Gates Set

Team BlackSheep TBS Tiny Whoop LED Racing Gates Set

£119.99
LIGHT UP YOUR TRACK! The TBS LED Racing Gates are the obvious next step for any serious Tiny Whoop racer. Sold in packs of 4 with included mounting options like clamps, magnets, hooks and grips, you can hang them anywhere you can fly a Tiny Whoop! Measuring 30.5cm by 42.5cm, these gates are the perfect size for micro drones. Included is an IR remote control for each gate programmed with dozens of animations and colour combinations to make your racetrack look serisouly pimped! Power these gates with a 3S lipo battery (XT60) or a 12V AC adapter (sold separately).  SMART GATES HERE WE COME! The TBS LED Racing Gates are the newest innovation in the microracing market, but you haven’t tapped into their full potential till you connect them to our TBS RaceTracker. When connected with the TBS RaceTracker using the included Gate Interface, the gates will flash to indicate the start and end of a race. As the race goes on the gates will flash the colour assigned to the drone that has just flown through, all thanks to cutting edge RF-mapping by the TBS RaceTracker. If you get the fastest lap, your dominance is portrayed for everyone to see with a rapid flashing signal. Control these smart gates with the TBS RaceTracker Drone Squad smartphone app and be the most lit at your local race club! PACKAGES Option1: TBS Tiny Whoop LED SmartGate Set including TBS RaceTracker Option 2: TBS Tiny Whoop LED Racing Gates (Set of 4) 3D PRINT ACCESSORIES! TBS RaceTracker holster Gate Stand + Combination piece
Brand: 
Collection: 

Pages

Subscribe to RSS - TBS