FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

Happymodel 2.4GHz ES24TX Pro Micro ExpressLRS ELRS TX

£36.90

The ES24TX Pro Micro TX module is designed by Happymodel and based on the open source ExpressLRS project, which is an affordable, low latency, long range RC system developed for FPV racing drones and other RC applications.

Being an open source project, it’s possible to build a ExpressLRS RF module from scratch, but Happymodel have saved you the effort with this complete module. It comes pre-loaded with the ExpressLRS firmware and its plug and play for most OpenTx transmitters with a Micro JR Bay such as the Radiomaster TX16S.

Collection: 
Category: 
Brand: 

Happymodel Crazybee X AIO F4 1-2S Whoop Flight Controller

£39.95

The Crazybee X is Happymodel's first Whoop AIO flight controller that can handle 2S voltage.

The crazybee X flight controller is a feature packed all in one Whoop flight controller. It comes with an integrated SPI receiver (DSMX, FrSky or FlySky), ESC, and 5.8GHz VTX (with support for BetaFlight OSD)! There's no soldering required as it uses plug connections for connecting motors and a camera. It would be a suitable upgrade FC for the Mobula6/Mobula6HD or any 1S Whoop build too

Collection: 
Brand: 

Happymodel 2.4GHz ExpressLRS Slim Pro TX Module (ES24TX)

£39.90

The ES24TX Slim Pro TX module is designed by Happymodel and based on the open source ExpressLRS project, which is an affordable, low latency, long range RC system developed for FPV racing drones and other RC applications. 

Being an open source project, it’s possible to build a ExpressLRS RF module from scratch, but Happymodel have saved you the effort with this complete module. It comes pre-loaded with the ExpressLRS firmware and its plug and play for Frsky X-lite/X-lite pro/X9 Lite & TBS Tango2 radios.

Collection: 
Category: 
Brand: 

Happymodel Mobula6 ELRS Brushless Whoop (2.4Ghz/868Mhz)​

£83.50
This is the ExpressLRS version of HappyModel's popular Mobula6 Tiny Whoop. ExpressLRS is an open source RC system that has the characteristics of low latency and a high packet rate. Its link quality is very reliable and provides excellent range, think TBS Crossfire, but a more budget version. There are two versions of the Mobula6 ELRS. One option is fit with a 868Mhz ExpressLRS Serial-based receiver and the other a 2.4GHz ExpressLRS SPI receiver (868Mhz generally has better signal penetration / 2.4ghz has lower latency and a smaller antenna, but ultimately both are incredibly fast and will exceed the FPV range). For both options you will need a radio that supports ExpressLRS, this probably means buying a module as most radios including radios like the RadioMaster TX16S don't support this protocol as standard. In addition to the change of receiver, this version of the Mobula 6 is fit with HappyModel’s new 0702 26000KV brushless motor, which is one of the lightest 1S motors on the market. This new motor is also matched with a different prop, a HQProp 31mm Bi-blade. We think this new version of the Mobula6 is going to be really popular. Previously range has always been an issue with Tiny Whoops, so now thanks to the ExpressLRS receiver you can enjoy this Mobula 6 without having to worry about the failsafe kicking in.  Features AIO Flight controller with ELRS Receiver and 5.8G VTX Super light 1S 65mm Brushless whoop, only 18.7g Equipment with the lightest brushless motors-SE0702 only 1.46gram Runcam Nano3, the lightest 1/3 CMOS 800TVL Camera Smooth and powerful Compatible for 1S Lipo/LIHV Includes batteries and charger Receiver options: 2.4GHz ExpressLRS SPI receiver 868MHz ExpressLRS Serial-based receiver Version 2.4GHz ELRS  915MHz ELRS 868MHz ELRS  Color Green Blue Blue Flight controller ELRS F4 2G4 CrazyF4 ELRS CrazyF4 ELRS Firmware target CRAZYBEEF4SX1280 CRAZYBEEF4DX CRAZYBEEF4DX Built-in ExpressLRS receiver SPI 2.4GHz Serial-base 915MHz Serial-base 868MHz Built-in Dshot ESC 5A 5A 5A Receiver antenna plug SMD ceramic antenna IPEX MHF3 IPEX MHF3 Onboard VTX power 25mw~200mw 25mw~200mw 25mw~200mw Brushless Motor 0702 KV26000 0702 KV26000 0702 KV26000 Propeller HQPROP 31mm Bi-blade HQPROP 31mm Bi-blade HQPROP 31mm Bi-blade Battery 1s 300mah Lipo battery 1s 300mah Lipo battery 1s 300mah Lipo battery
Brand: 
Collection: 

Happymodel EX1202.5 11500KV Motor for Crux3NLR

£8.50

This motor is used by the Happymodel Crux3NLR drone.The motor is compatible with 1S (3.7v) voltage.

You can purchase in either CW or CCW, a red dot on the white plug indicates the CW version.

Collection: 
Category: 
Brand: 
Happymodel Spare Part Crux3NLR 3Inch Nano Long Range Frame Kit

Happymodel Crux3NLR Nano Long Range 18650 Frame Kit

£16.50
This is an original replacement frame kit for the Happymodel Crux3NLR (Nano Long Range) drone. The frame is using 3K 3MM carbon fibre for the arms and anodised aluminium parts for the camera mount, which suits a Nano size (14MM) FPV camera. The body of the frame is plastic and incorporates a tray to carry a 1S 18650-battery cell and space for a 20x20mm GPS module. While this frame is a spare part for the HappyModel drone, there's nothing to stop you using it to create your own Nano Long Range Quadcopter. This type of drone is great for cruising, with flight times from a single 18650 cell of up to 15mins! Recommended parts: Flight control: 5A_ AIO - Happymodel ELRSF4 2G4 AIO 5-in-1 flight controller Motor: 1202.5 KV11500 - Happymodel EX1202.5 KV11500 Camera: 14x14mm Nano Camera - Caddx Ant 1200TVL Propeller: 3 inches - Gemfan 75mm Bi-Blade Propellers Battery: 18650-3000mah Happymodel Crux3NLR Nano Long Range Drone Pre-Built
Brand: 
Collection: 

Happymodel V4 75mm Frame For Moblite7 and Mobula7 - White

£7.50
This is a new frame upgrade for the Moblite 7/Mobula 7. Compared to the original V2 frame, the V4 is equipped with a lower FC mount position which no longer blocks the USB port. Also the thickness of the plastic has been increased, making it more rugged. Its weight has increased by 1g, but it is more resistant to falls and offers better stability, so a worthy upgrade overall. Also usable for other 75mm whoop builds!
Brand: 
Collection: 

Pages

Subscribe to RSS - Happymodel