FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment


COVID-19 Update: Flying Tech is open and shipping daily, however our phone support is limited so please email us if possible. Please note shipment times may take longer than normal as postal services are operating with fewer staff.

Thanks to all of our customers for their support at this difficult time and stay safe.

GEPRC GEP-LX Leopard FPV Racing Drone X Frame 4/5/6

£49.00
The leopard, natural predators, running at a staggering rate This is the GEP-LX, also called ‘Leopard’, There are three kinds of specifications respectively. 4inch(wheelbase 195mm), 5inch(wheelbase 220mm), 6inch(wheelbase 255mm). The fuselage low center of gravity design. The machine use 3k ultra-light carbon plate + Aviation aluminum # 7075 body. To strengthen the four arm, we also design a fixed four arm of the aluminum alloy parts, it is not easy to make the machine arm shift. In order to perfect fit more lens, we presented two schemes of board. The optimum foxeer HS1190 models of cameras and 1 or 2 generation Runcam Swift models of cameras. We also equipped with A piece of PDB, take BEC output 5 v 3 A and 12V 0.5A.The frame all adopt the YFS screws, 12.9 magnitude High quality carbon with nice smooth edges. two sets of side plates to accommodate cameras of varying lengths and depths. You can set the camera deeper for more protection or further out for a shorter camera Blends great design and durability. Seriously tough frame. Great for aggressive acro flying through the trees! Features: True X Frame Design Good for Racing & Freestyle 3 Sizes of Frame - 4", 5", 6" High Strength 3K Carbon Fibre Drone Frame 7075 Aluminium Alloy Reinforcing Structure Taiwan YFS screws, 12.9 Level of Hardness Adjustable FPV Camera Mount for HS1170, HS1190, Owl, Swift etc (0-60 degrees) Includes Power Distribution Board with XT60 (5V/12V 3A BEC) Wider Motor Protector Base Fixed Antenna Mount Recommended Parts: Flight controller (F4 / F3 / Naze32) Brushless motor (2204/ 2205/ 2206/ 2305/ 2306) Brushless ESC (20A-30A) Battery (3S 1300mAh ~ 4S 1500mAh) Propellers: LX4 195mm use 4 inch propellers LX5 220mm use 5 inch propellers LX6 255mm use 6 inch propellers Included: 1 x GEP LX Leopard FPV Racing Frame 2x GEPRC Sticker Sheet 1x PDB 5V & 12V 2x Battery Strap
Brand: 
Collection: 
Barcode: 
7109113988915
GEPRC GEP-RX5 Hawk 210mm FPV Racing Drone X-Z Frame

GEPRC GEP-RX5 Hawk 210mm FPV Racing Drone X-Z Frame

£59.99
Features: 210mm True X Frame Front arm and rear arm staggered increases flight efficiency & speed High strength 3K carbon fibre construction Strong lightweight frame (92g) Adjustable FPV camera mount for HS1170, Owl, Swift etc (0-60 degrees) Adjustable GoPro mount (0-50 degrees) Includes power distribution board with XT60 (5V/12V 3A BEC) Wider motor base offers crash protector Integrated programmable tail LED board Recommended: Flight Controller: F3 / Naze32 / CC3D Motors: 2204/2205/2206/2305/2306 ESC: 30A Propeller: 5inch Battery: 3S 1300mAh ~ 4S 1300mAh ​ GEPRC GEP-RX5 Hawk Parts GEPRC GEP-RX5 Compatible with 5" Props
Brand: 
Collection: 
Barcode: 
7109114034246

GEPRC GEP-TX5 Chimp 210mm FPV Racing Drone X Frame

£49.99
This we all call him Chimp, model is GEP-TX. Careful players can see, GEP-VX and our Chimp is the same series of products, the appearance of a bit like a big brother GEP-VX. Chimp is a frame that can take the Gopro camera. Structure of “X Ture”. Applicable to freestyle and competition, there are 3 versions of optional, 4 inch (wheelbase 180mm), 5 inch (wheelbase 210mm), 6 inch (wheelbase 230mm), are using 4mm thickness of the floor. The whole machine uses 3K ultra light carbon plate. Gopro elements can be adjusted to adjust the range of 20-50 degrees, the lens is perfect support Hs1177, Hs1190, swift, Plus OWL and other most lenses. Lens distance 28mm. A reasonable layout, the factory comes with 10 WS2812B lights, support the microcontroller or flight control. Motor protection like a fish, to protect the motor to a certain extent, very good. Whole machine using YFS screws, the factory comes with a golden version. Random comes with BEC, 5V/12V PDB output. Save most of the time the player. Features: 210mm True X Frame High strength 3K carbon fibre construction Strong lightweight frame (g) Adjustable FPV camera mount for HS1170, Owl, Swift etc (0-60 degrees) Adjustable GoPro mount (0-50 degrees) Includes power distribution board with XT60 (5V/12V 3A BEC) Wider motor protector base Integraded tail LED board Recommended: Flight Controller: F3 /Naze32/ CC3D Motors: 2204/2205/2206/2305/2306 ESC: 30A Propeller: 5inch Battery: 3S 1300mAh ~ 4S 1300mAh ​
Brand: 
Collection: 
Barcode: 
7109114223701
GEPRC GEP130X Carbon Fibre Racing Drone X Frame with PDB - 130mm

GEPRC GEP130X Carbon Fibre Racing Drone X Frame - 130mm

£29.99
The GEP130X is one of the latest frames from GEPRC and like the rest of their range; it's very well designed, made from high quality parts and looks fantastic. The frame itself is a 130 size mini quad, designed in a X configuration. It's made from high quality 3K billet carbon fibre, 2.5mm for the lower deck and 1.5mm for the upper deck. Brightly coloured CNC aluminium columns are used to space the decks and also add a little bit of bling to the airframe. The carbon gives the frame great strength, while at the same time keeping the weight to a minimum. The frame weighs in at only 38grams! It's not just a frame though; it also comes with a 36mm power distribution board, which has a 5v and 12v regulated outputs to power your FC and FPV gear. For those that plan to turn it into a mini FPV racer, it's also suited to that. The frame includes an adjustable camera mount that will give up to 45 degrees of angle. Finally, there is also a cut out in the top plate to install your VTX antenna. Over all it's a really well thought out package, we absolutely love its quality, the carbon is beautiful and something about its aesthetics just look right. The kit includes assembly instructions, stickers and it even comes with cable ties to attach your ESCs to the frame, what’s there not to like? Turn the GEP130X into a little rocket with something like the Emax RS 1306 motors and 20A LittleBee ESC's running 3045 DAL tri-props. Features: 130mm X Frame High strength 3K carbon fibre construction Strong lightweight frame (38g) Adjustable FPV camera mount (up to 45 degrees) Battery mount positions top and bottom 25mm high strength non-slip aluminum column 3-inch propellers Power Distribution Board (5V/12V 3A BEC) Recommended: Flight Controller: F3 /Naze32/ CC3D Motors: 1104/1306/1806 ESC: 20A Propeller: 3inch Battery: 3S 700mAh ~ 4S 650mAh
Brand: 
Collection: 
Barcode: 
7109118325630
Subscribe to RSS - GEPRC