FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

DAL Cyclone Propellers with Support for POPO Quick Swap

DAL Cyclone Propellers with Support for POPO Quick Swap

£3.25
As pilots continue to squeeze every ounce of power out of their quads, many have realized they can fit props slightly larger than their reported arm size. You might wonder why there have been more 5.1 and 5.2 inch props out there lately and it's because many frames can clear them. This extra bit of length can make a significant difference in the power and handling of your quad. Be sure to check each frame as one 5" frame may be able to fit different props compared to another 5" frame.  DALProp has been a mainstay in the prop industry for a long time, and their Cyclone series is well known as some of the most dependable props on the market. This new Prop from Dal is also compatible with POPO® ("Pop On, Pop Off") motors. POPO is a innovative quick swap system that enables mounting props to brushless drone motors in seconds with the push of a button, without the need for a prop nut and wrench. The props are also compatible with regular motors and M5 prop nuts.
Brand: 
Category: 
DAL T7056C Cyclone Propellers - Crystal Clear

DAL T7056C Cyclone Propellers - Crystal Clear

£3.49
With hundreds of thousands of sets sold each month, the Cyclone line of props is the go to choice for most FPV pilots. DAL has now released a 7" propeller for all those large quads out there that need a little more bite in their props than many other 7" props with a lower pitch provide. The 7" Cyclone features specialised geometry for large diameter blades, giving it steady thrust. It's perfect for endurance / long range quads, 7" quads or low KV 6S setups. Like all other DalProps this blade is made of a high quality, flexible and durable plastic that can easily survive crashes and tree clips.
Brand: 
Category: 
Cyclone Propellers T6040C Crystal Blue

DAL Tri-Blade Cyclone Prop Pack 2x CW/CCW 5 - 6 Inch

£3.00
DAL's newly released CYCLONE series props have refined aerodynamics for better control, smoother flight and more thrust! Best of all, this extra performance doesn't come at a price, the Cyclone props are more efficient and run quieter too. As with the regular DAL Props, these are made from the same super strong polycarbonate glass fiber mix material, which gives DAL Props their reputation for being almost indestructible. They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with orientation. Sizes: 5045 3 Blade (5 Crystal Semi-Transparent Colours) 6040 3 Blade (2 Crystal Semi-Transparent Colours) - perfect for endurance quads, 6" quads or low KV 6S setups. ​Features: Extremely durable Great balance Excellent thrust Inner diameter: (Prop Mount) 5mm Usage: 210+ Frame 5x4.5 Tri-Blade Cyclone propeller, Pre-Balanced on Dynamic Balancing Machine 4 Props total (2CW, 2CCW)
Brand: 
Category: 
DAL Prop 5050C Cyclone Crystal Orange

DAL Two-Blade Cyclone Prop Pack 2x CW/CCW 5 - 6 Inch

£2.75
DAL's newly released CYCLONE series props have refined aerodynamics for better control, smoother flight and more thrust! Best of all, this extra performance doesn't come at a price, the Cyclone props are more efficient and run quieter too.   As with the regular DAL Props, these are made from the same super strong polycarbonate glass fiber mix material, which gives DAL Props their reputation for being almost indestructible. They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with orientation. Size: 5050 (5 Crystal Semi-Transparent Colours) Extremely durable Great balance Excellent thrust Inner diameter: (Prop Mount) 5mm Usage: 210+ Frame 5x5 Bi-Blade Cyclone propeller, Pre-Balanced on Dynamic Balancing Machine 4 Props total (2CW, 2CCW)
Brand: 
Category: 
DalRC XR220 Racing Drone X Frame with PDB & LED Board

DalRC XR220 Racing Drone X Frame with PDB & LED Board

£39.00
The DalRC XR220 is a really good FPV racer. It's light, strong, well designed and comes with an integrated PDB and LED board to complete the package. The XR220 is designed as a true X-frame. While there are lots of frame configurations on the market to choose from, X-frames are arguably the best format for performance racing drones. It means the quad can be perfectly balanced for better flight characteristics; and stay very compact which keeps the weight to a minimum. The XR220 frame is designed around a one-piece base plate. This gives it greater strength than equivalent frames that use individual arms. For even greater rigidity, the supplied carbon fibre braces can be installed between the arms. These parts also act as crash rings, so well worth attaching for those learning to fly. As mentioned, the XR220 is designed as a FPV racer, so at the heart of its design is space for a FPV camera with a tilt adjustable mount. The mount is compatible with RunCam Swift type cameras and adjusts from 10-45° degrees. The FPV camera housing not only protects your FPV cam, it also doubles up as a mount for a recording camera. Ontop of it you can sit an action camera such as a RunCam 2. Below the camera mounts is space for you flight controller and other electronics. The frame itself includes a PDB to satisfy your power requirements. It has 12 volt and 5 volt BEC outputs ready to power your FC and FPV gear. There are also auxiliary output connections should you need to power anything else from these regulated power supplies. Finally, the frame features a very neat LED board. This can be set to display different flashing patterns, colours and a low voltage alert via a simple push button. Features: 220mm X frame High strength 3.5mm 3K carbon fibre construction with aluminium spacers Changeable frame layout, includes removable arm braces / crash ring Adjustable FPV camera mount (up to 10-45° degrees) Angled action camera mount (set at 38°) In built 5V/12V 3A PDB  Programmable LED Light (7 colours, multiple flash mode, low Voltage alarm) XT60 battery wire included Nylon motor guards (landing gear) Recommended: Flight Controller: Naze32 Rev 6 Motors: 2204/2205/2206/2208 Supported propellers: 4"/5"/6" ESC: 20-30A Battery: 4S 1300 - 1500mAh​ XR220 LED Light Board XR220 Frame Weight XR220 LED Light Board Demonstration
Brand: 
Collection: 
Barcode: 
7109115981310
DalRC Racing Drone Anti-Slip Battery Mount and Strap

DalRC Racing Drone Anti-Slip Battery Mount and Velcro Strap

£6.00
If you are anything like us, you'll find changing batteries a bit of a faff. Securing a battery with just a regular Velcro strap can a be a little bit awkward and sometimes difficult to secure tightly. That's where this battery mount comes in. Unlike conventional Velcro straps which use a loop and then wrap around on themselves, this one has Velcro hocks on both ends so it secures to itself on both sides. This makes battery changes much quicker; trust us it works very well. With it, the mount can hang below your frame so you can simply insert the battery and then adjust the strap to secure. The mount comes with a anti-slip foam pad so the battery ends up being held very securely. The carbon fibre plate also gives the battery some extra crash protection. The mount is the perfect size to hold a 3-4S racing drone battery. To use this mount, your frame must have two battery strap slots. 
Brand: 
Category: 
Mini Camera Transmitter 25mW 200mw 48CH

Title

All-in-One Mini FPV Camera VTX 5.8Ghz 25mW / 200mW 48CH

£29.00
FPV setups needn't be complicated, proven by this tiny little all-in-one camera transmitter unit. Simply provide power and attach it to your model to get a live video stream. To view the image, we recommend using something like the Hawkeye FPV monitor – between the two that’s a complete FPV setup for under £115. The unit requires a 3.3-5v power input, so it's easily powered from a 1S LiPo battery; it's very much plug and play. The transmitter has a switchable 25mW / 200mW output, so you can use it legally in the UK without a licence on 25mW. It also has 48 channels, including RaceBand frequencies making it compatible with most FPV gear out there. The channels are easily selected via a pushbutton. Another neat feature of the camera is that you can flip the image, useful if you end up having to mount the camera upside down. As the camera/transmitter unit is extremely small and lightweight, it could be installed on almost anything. To attach it you could use something as simple as Velcro. Lots of people are using them on micro quads like the Blade Inductrix to race FPV around their house. It's also particularly suited to some of the 'FPV Ready' aircraft coming to market such as the Hobbyzone Champ S+. Features: Micro sized and lightweight Easy install, plug and play 47 channel 25mw / 200mW VTX w/ Raceband Push button control channel selection Compatible with NTSC/PAL systems Supports image flip Operation: Channel Selection: Short press to switch channel, long press (2S) to change bands. Image Flip:  Long press (5S) NTSC/PAL: Dip Switch 1 ON = PAL / OFF = NTSC RF Power Level: Dip Switch 2 ON = 25mW / OFF = 200mW   Compatible with the FPV Ready Hobbyzone Champ S+.
Brand: 
Category: 
Barcode: 
7109115443962

Pages

Subscribe to RSS - DalProp