After-market mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.
IMPORTANT: Due to a hardware incompatibility between the FrSky XJT mini module and the Tango 2 (V2 and up) boards, the Tango 2 will NOT be able to support the XJT mini module. Other Lite modules are supported.
INSTALLATION
1. Install the FPC cable to the PCB.
2. With the blue side facing up, lift the lock and slide the cable in then lock it down.
3. Feed the cable through the bottom and place the PCB to the module bay.
4. Turn the module bay around to make sure everything fits accordingly.
5. Close the case with the 2 screws provided
6. Use a dremel, knife or solder tip to cut a small hole accoridng to the outline.
7. Slide the flex PCB through the drilled case.
8. Clean the back surface and tape the Tango 2 module bay down
9. Install the FPC cable into the receptacle.
Close the Tango2 case, and you’re done!
Reviews
Clear filtersThere are no reviews yet.