TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions

Introducing the Caipirinha II, the new long range cruiser by Team BlackSheep. With up to 2 hours of flight time, smooth flight and direct control, this FPV wing is in a class of its own. It’s a gentle long range cruiser that turns into a fierce mountain diver with just a slight push on your pitch stick. Dominate the skies, fly in formation with friends, dive all things and bring home footage that blows your mind!

The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable.

The PNP kit from TBS is equipped with high quality, digital metal gear servos, a CP2814-1150kV Cobra motor, 50A HobbyWing ESC and high quality Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!

KIT version is barebones wing version with all hardware. No electronics included except for the PDB.

We can confidently say it’s going to be the only long range cruiser you will ever need, and the only flying wing in its weight class with such a performance envelope.

FEATURES

• Small, lightweight, fly anywhere design
• Ultimate in flight stability and endurance
• Virtually indestructible EPP/Plywood construction
• Pre-cut camera, servo, battery, R/C receiver and video transmitter slots
• 2x push-to-open equipment bays for R/C and FPV electronics
• Pre-cut, sanded and covered ultra-lightweight elevons & pushrods

PNP KIT CONTAINS:

• CAPIRINHA 2 with all hardware accessories
• 2x Digital MG Servo 6kgf/cm, 5-6V
• CP2814-1050kV Cobra Motor
• 50A HobbyWing Skywalker Wing ESC
• Aeronaut 10×6 folding prop with prop assembly (CNC aluminum)
• Everything prepared as far as possible. Final assembly time around 2 hours.

HARDWARE KIT CONTAINS:

• CAPIRINHA 2 Hardware – No electronics included except for the PDB.

RECOMMENDED FPV AND RADIO EQUIPMENT

• FPV camera (26x26mm): HS1177
• Recording camera: RunCam 3S
• Video transmission:
  • 5.8GHz: TBS RaceWing or TBS Unify Pro
  • 2.4GHz: Unify 500mW / 800mW VTx
• 2.4GHz Receiver (3-CH or more) / Crossfire Receiver: Nano Rx, Micro Rx, Diversity Rx
• Corssfire Transmitter: Full Module, 100mW Module
• Battery: 4S 4500mAh – 6600 mAh 20C LiPo