ER16 PWM – Dual-Band GEMINI and GEMINI-X Receiver
£79.99 Inc. VAT
In stock|Next shipping: 18/11/2026
The ER16 is built for large-scale aircraft that demand redundancy, robust power handling, and reliable system integration. Designed with redundancy at every critical point—RF link, power input, and system control—it delivers a stable, high-integrity connection for complex fixed-wing platforms.
Note on FCC Certification:
Due to current FCC regulations classifying this product as a foreign-produced UAS component, we are currently unable to obtain FCC certification. This item cannot be shipped to or sold in the United States at this time.
Features
- ExpressLRS Performance: Low latency, high reliability, and excellent link quality with flexible configuration options.
- Dual-Band Gemini X 2.4GHz and Sub-G 900MHz: Simultaneously operates on both frequency bands to maintain a stable RF link in challenging environments.
- 16 PWM Outputs + Serial Support: Full 16-channel PWM output with dedicated bidirectional UART and serial interfaces for system integration and expansion.
- Dual XT30 Redundant Power Input (Isolated): Two isolated XT30 inputs support independent redundant power sources with separate telemetry reporting for each battery. If one power source fails, the system continues operating from the remaining supply without interruption.
- External Safety Switch (SW Port): Dedicated interface for pull-tab or external safety modules, allowing the system to remain inactive until intentional power-up for safer handling and operation.
- Top-Mounted Servo Outputs: PWM connections are positioned on the top side for cleaner wiring, easier access, and simplified installation.
- PWM Signal Amplification: Amplified PWM outputs help maintain signal quality over long servo leads and extension cables. They also improve compatibility with larger, high-torque servos, helping ensure reliable control signal delivery throughout the aircraft.
- Independent Multi-Source Voltage Telemetry: Monitor up to four power sources simultaneously using dedicated ADC channels: EXT-V (up to 70V), receiver supply voltage (V-PWM) (up to 12V), XT30-1 input voltage (up to 12V), and XT30-2 input voltage (up to 12V).
- External Voltage Telemetry Connector: Dedicated connection for direct main-pack voltage monitoring.
- External UART Port: Dedicated interface for telemetry devices, sensors, and system expansion.
- Wi-Fi Updates & WebUI: Configure and update directly without disassembly.
- Robust MMCX Antenna Connectors: Secure, serviceable antenna connections for easy maintenance and long-term reliability.
- Durable Injection-Molded Housing: Designed for structural strength and consistent protection in large airframes.
- Application: Designed as a PWM receiver for large fixed-wing aircraft, especially where redundancy and higher channel counts are required.
- Compatibility: Compatible with all ExpressLRS transmitters and modules, including radios with built-in ELRS.
At its core is the ExpressLRS system, built around dual Semtech LR1121 transceivers and a dual-band Gemini X RF architecture operating on both 2.4 GHz and Sub-G 900 MHz. This delivers reliable control link performance across a wide range of operating conditions.
With 16 PWM outputs, serial protocol support, dedicated telemetry interfaces, an external safety system, and multi-channel voltage telemetry, the ER16 provides comprehensive monitoring and control of critical onboard systems. Independent telemetry channels support Batt 1, Batt 2, Ext-V, and additional sensor-reported voltage sources, providing complete visibility of redundant power systems throughout the aircraft.
The ER16 features amplified PWM outputs designed to maintain signal quality across long servo runs and extension cables often found in large-scale aircraft. The amplified output stage also improves compatibility with larger, high-torque servos, helping deliver reliable control signals throughout the aircraft. The receiver also features four independent voltage telemetry channels with dedicated ADCs, allowing simultaneous monitoring of the receiver supply voltage (V-PWM) (up to 12V), XT30-1 input (up to 12V), XT30-2 input (up to 12V), and an EXT-V input for monitoring external battery voltages up to 70V. The ER16 includes a dedicated 4-pin JST-GH locking UART/CRSF port for flight controllers, stabilizers, telemetry sensors, and other UART peripherals.

Dual isolated XT30 inputs allow independent power sources to operate in parallel without risk of backfeed. If one supply drops, the system continues operating seamlessly from the remaining source without switching or intervention.
From installation to operation, every detail is designed to simplify integration and improve serviceability, including top-mounted servo outputs for cleaner wiring, robust MMCX antenna connections, and a durable injection-molded housing built for long-term use.
⚠️ XT30 Power Input Notice
Dual XT30 Power Input:
The XT30 inputs provide direct battery voltage to the receiver and PWM power rail. Output voltage matches the connected input voltage. Use only servos rated for the applied voltage. High-voltage systems (2S LiPo/Li-ion) require HV-rated servos. Standard 5V servos must be powered through a regulated 5V supply or the standard servo power input pins.
When using the XT30 inputs to power the receiver and servos, the ESC’s 5V/BEC wire must be disconnected to prevent back-feeding and possible damage.
EXT-V Power Input:
The EXT-V input is accessed through the 2-pin JST-GH connector. Connect the red wire to the positive (+) terminal of the battery or ESC. The ER16 provides independent ADC channels for monitoring V-EXT and V-XT30, allowing it to accurately detect and report the appropriate input voltage for your installation.
Designed for large-scale systems using multiple servos and long wiring runs.
Associated Products
- Item: ER16 PWM – Dual-Band GEMINI and GEMINI-X Receiver
- Input Voltage: DC 5.0 – 12.0V
- Wireless Protocol: ExpressLRS
- Output Channels: 16CH PWM
- Serial Output: CRSF / SBUS
- Telemetry Power: Up to 100mW (adjustable via LUA)
- Voltage Detection Range (EXT-V): DC 4.0 – 70V
- Bus Interface: CRSF
- Antenna: 25 cm high-sensitivity, MMCX connector
- Weight: 33.0 g (without antenna)
- Dimensions: 61.5 × 43.8 × 16.8 mm
- Firmware Target: RadioMaster Dual 2.4GHz/900MHz Receiver
- Device Name: ER16 Dual Band True Diversity + 16×PWM RX
- ELRS FW Version: Requires version 4.1.0 or Higher
Included
- 1 * ER16 PWM – Dual-Band GEMINI and GEMINI-X Receiver
- 2 * 2.4GHz Antennas
- 2 * Dual-Band Antennas
- 1 * Safety Switch Module
- 1 * Voltage Telemetry Cable (Type-B)
- 1 * ELRS RX SBUS Cable
- 1 * CRSF Cable
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
SHIPPING & DELIVERY
We are based in the UK and ship to most destinations worldwide.
We dispatch orders during the times shown on our Dispatch Schedule. Orders placed before the daily dispatch cutoff will ship the same day (subject to stock availability). Orders placed after the cutoff will ship on the next scheduled dispatch day.
A confirmation email is sent once your order has been packed. If you need to amend your order, please contact us as soon as possible — once shipped, we’re unable to make changes.
We work with trusted delivery partners including Royal Mail, DHL, UPS, Fedex and Parcelforce. If you have a delivery requirement or would like to arrange collection, please get in touch.
Next Dispatch: Today
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
Shipping to the UK
- Order before the daily dispatch cutoff for same day dispatch.
- FREE delivery available on qualifying orders over £99 (under 1kg).
For small, low-value orders, Royal Mail First Class is our most economical option. Royal Mail Tracked 24 is the most popular choice, offering full tracking and flexible delivery options. For guaranteed next working day delivery, we recommend Royal Mail Special Delivery.
Royal Mail delivers to residential addresses Monday to Saturday, while courier services (including DHL) typically deliver Monday to Friday.
International Postage
- USA orders: Import duties and taxes are prepaid by us — no additional customs charges on delivery.
- Other destinations: Customs duties or import taxes may apply and are the responsibility of the recipient.
Smaller, lower-value orders may be sent via Airmail or tracked postal services. Economy road and express air courier options are available depending on destination. For faster delivery, we recommend express air courier services such as DHL Express, which typically deliver within 1–2 working days across Europe and a few working days for most other destinations.




Associated Products
Reviews
Clear filtersThere are no reviews yet.