We like all of Matek’s racing drone PDBs, but this has to be our favourite. It comes with an integrated XT60 power connection which not only looks the part, it stops your power cables from getting caught up in the props. We’ve also found it to be easy to solder and most importantly reliable.
Like all PDBs, it’s job is to take power from your flight battery and break it out to your ESCs and other electronics. This board has 6 pairs of ESC solder pads, so it’s suited to quads and hexas. It also has filtered 5 and 12V outputs to power your flight control and FPV gear. The 5V onboard BEC supports currents up to 2A continuous and the 12V supports up to 0.5A (bursts up to 0.8A). The board is compatible with 3-4S, but 4S is recommend. If 3s is used, the BEC will output the LiPo voltage minus 1V.
The board is a standard size PDB, so you can stack it cleanly with the CC3D, Naze and most other board type flight controllers using i’s 30.5mm mounting holes.
Features:
Integrated XT60 Power Connector
6 ESC outputs
Input voltage range 3S-4S LiPo
Regulated 5V & 12V BEC outputs with LED Indicators
High quality 2oz copper, 4 layer PCB construction
Perfect for mini quads
Standard 30.5×30.5mm holes (stackable with Naze32, CC3D etc.)
Integrated XT60 Power Connector
Features:
Integrated XT60 Power Connector
6 ESC outputs
Input voltage range 3S-4S LiPo
Regulated 5V & 12V BEC outputs with LED Indicators
High quality 2oz copper, 4 layer PCB construction
Perfect for mini quads
Standard 30.5×30.5mm holes (stackable with Naze32, CC3D etc.)
Specification
Input voltage range: 3S-4S operation (9 – 18V DC)
BECs: Regulated 5V and 12V
Construction: 2oz copper & 4-layers PCB
Dimensions: 36 x 50 x 4mm (without XT60)
Mounting: 30.5 x 30.5m (3mm holes)
Weight: 7.5g (w/o XT60), 11g (w/XT60)
ESC outputs:
Continuous current: 25A x4 or 15A x6
Peak current (10 seconds/minute): 30A x4 or 20A x6
BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator, efficiency is up to 95%.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Standard output designed to power cameras and video transmitters,etc.
Be the first to review “Matek XT60 Quad PDB with 5V & 12V BEC Outputs (36x36mm)” Cancel reply
Shipping
SHIPPING & DELIVERY
We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the size/weight and shipment location. We process orders Monday to Friday and pride ourselves on our quick turnaround of orders - most UK orders will arrive the next day.
We are partnered with several delivery companies including Royal Mail, DHL, UPS and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us.
A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.
Order before 4PM for same day dispatch with Royal Mail, 2PM for next day delivery with DHL and 1PM for next day delivery with APC.
We offer FREE Shipping on UK orders over £99, weighing less than 1kg.
The courier options deliver Monday to Friday, Royal Mail delivers to residential addresses on Monday to Saturday.
For small low value orders our cheapest delivery service is Royal Mail First Class. For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options.
International Postage
Order before 4PM for same day dispatch with Royal Mail.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
DHL Express offers NEXT DAY delivery to most European destinations and a very fast delivery for countries further afield, generally 2-3 days.
Orders shipped outside the EU may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.
Reviews
Clear filtersThere are no reviews yet.