Happymodel Mobula6 ELRS 1S Brushless Whoop (2.4Ghz)
We ship worldwide - Same day shipping on all orders placed before 1pm - FREE delivery on UK orders over £99 <1kg*
This is the ExpressLRS version of HappyModel's popular Mobula6 Tiny Whoop. ExpressLRS is an open source RC system that has the characteristics of low latency and a high packet rate. Its link quality is very reliable and provides excellent range, think TBS Crossfire, but a more budget version. There are two versions of the Mobula6 ELRS. One option is fit with a 868Mhz ExpressLRS Serial-based receiver and the other a 2.4GHz ExpressLRS SPI receiver (868Mhz generally has better signal penetration / 2.4ghz has lower latency and a smaller antenna, but ultimately both are incredibly fast and will exceed the FPV range). For both options you will need a radio that supports ExpressLRS, this probably means buying a module as most radios including radios like the RadioMaster TX16S don't support this protocol as standard.
In addition to the change of receiver, this version of the Mobula 6 is fit with HappyModel’s new 0702 26000KV brushless motor, which is one of the lightest 1S motors on the market. This new motor is also matched with a different prop, a HQProp 31mm Bi-blade.
We think this new version of the Mobula6 is going to be really popular. Previously range has always been an issue with Tiny Whoops, so now thanks to the ExpressLRS receiver you can enjoy this Mobula 6 without having to worry about the failsafe kicking in.
|Version||2.4GHz ELRS||915MHz ELRS||868MHz ELRS|
|Flight controller||ELRS F4 2G4||CrazyF4 ELRS||CrazyF4 ELRS|
|Built-in ExpressLRS receiver||SPI 2.4GHz||Serial-base 915MHz||Serial-base 868MHz|
|Built-in Dshot ESC||5A||5A||5A|
|Receiver antenna plug||SMD ceramic antenna||IPEX MHF3||IPEX MHF3|
|Onboard VTX power||25mw~200mw||25mw~200mw||25mw~200mw|
|Brushless Motor||0702 KV26000||0702 KV26000||0702 KV26000|
|Propeller||HQPROP 31mm Bi-blade||HQPROP 31mm Bi-blade||HQPROP 31mm Bi-blade|
|Battery||1s 300mah Lipo battery||1s 300mah Lipo battery||1s 300mah Lipo battery|
Model: SE0702 KV26000
No.of Cells(Lipo):1S only
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in ExpressLRS 2.4G/915MHz/868MHz receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible
Onboard Serial-based ELRS Receiver
Operation current: ~100Ma
Rx To FC protocol: CSRF
RF Frequency optional: 915mhz or 868mhz(EU)
Antenna connector: IPEX4
Telemetry output Power: <17dBm
Firmware target: Happymodel_RX_ES915RX
Receiver protocol: CRSF
Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware)
Firmware flash via Betaflight pass-through
Onboard 5.8g VTX
Output power: 25mw~200mw
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band
Model: RunCam Nano 3
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens: 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Continuous Discharge Rate: 30C
Sorry, we don't currently have any product related advice for this item. For general tips, tutorials and help please check out our Multirotor Beginner's Guide. Alternatively feel free to ask us a question.
All information relating to shipping and delivery is stated here. Should you not find what you are looking for, please contact us.
Shipping costs are calculated once items have been placed in your basket during checkout.
UK Postage: Here at Flying Tech we process orders Monday to Friday and pride ourselves on our quick turnaround of orders. If stocks levels allow, we aim to dispatch orders placed before 4PM the same day with Royal Mail. Our cut off time for courier delivery is earlier; orders must be placed by 1PM for next day delivery with DHL and 1PM for next day delivery with APC. A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.
We are partnered with several delivery companies including Royal Mail, DHL, APC and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us. For small low value orders our cheapest delivery service is Royal Mail First Class; this service aims to deliver the next working day including Saturdays and it can be sent recorded for extra peace of mind – please note this is not a guaranteed next day delivery or trackable service.
For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options. Royal Mail Special Delivery will arrive by 1PM the next day and for an extra fee can be delivered on Saturdays. APC Overnight offers next day delivery with full tracking and a 2hr time slot pre-delivery text notification. DHL is a good option for larger consignments and remote locations such as Northern Ireland and Isle of Man. All high value orders are fully insured and will likely require a signature on delivery.
FREE shipping in the UK on orders over £99 (this is a signed for service and insured to a maximum of £40). Please note that the offer only applies to orders with a total weight under 1Kg and that a few products are exempt from the offer, such as LiPo batteries.
International Postage: We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the weight and shipment location, the price is quoted during the checkout. Low value order can be sent by Air Mail, but are not insured. Higher value, heavy goods will be sent with DHL or an alternative courier. Orders shipped outside the UK may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.
For our international customers who require a rapid delivery we off a DHL Express service. DHL Express offers NEXT DAY delivery to most European destinations and a very fast delivery for countries further afield, generally 2-3 days. For country specific estimated transit times, please refer this download.
We reserve the right to modify, remove or add to any of these services at any time. We endeavour to ship all items as fast as possible. If you would like an alternative shipping arrangement to be made please contact us.