We ship worldwide - Same day shipping on all orders placed before 1pm - FREE delivery on UK orders over £99 <1kg*
Available by special order only - please contact us. For an alternative drone we recommend the SkyRc Sphinx, it does everything the BG-250 does and more, with FPV already installed.
The drone world is constantly evolving as technology improves and costs reduce. First came the big drones, the Cinestar 8's and other expensive heavy lifting drones. These were shortly followed by the boom in 450-sized quadcopters like the DJI Flamewheel. Now the craze is for mini 250-sized FPV racing drones, which are undoubtedly the most exciting of the bunch.
As racing drones go, the DYS BG-250 racing quadcopter is one the best out there and one of the most affordable too. It will appeal to beginners and those who want to start flying quickly as it comes fully assembled straight out of the box; just add your receiver and battery to start flying.
The DYS BG-250 also has to be one of the best looking racing drones on the market thanks to its beautiful carbon fibre frame and integrated electronics, which include front and rear high powered LED lights. Traditional racing drone kits come as an assortment of parts; motors, ESCs and a mass of wiring to connect it all together. Anyone that has built one knows how hard it is to make it look neat. The BG-250's integrated electronics not only results in a very neat looking package, but also a performance advantage too. Wiring is heavy, so doing away with it gives a good weight saving. The BG-250 is one of the lightest racing drones out there, weighing in at just 275grams.
The BG-250 utilises a well-proven power system based on the popular DYS 1806 motor paired with 20amp BLHeli ESCs. Ask anyone about the DYS 1806 motor in drone racing circles and they will tell you that it's a reliable motor with great performance. Top speeds in excess of 40mph are well within reach using a 3S LiPo battery and even more if you upgrade to a 4S.
Although the BG-250 doesn't come with FPV gear, it's all setup to carry it. The frame has a mounting plate for a CCD board camera and the bottom plate PCB includes a built-in voltage regulator, which has four 5v outputs and 1 single 12v output, ready to power your FPV equipment. To complete a FPV setup you’ll need a camera and video transmitter on the drone itself and a video receiver and display (either a monitor or pair of goggles) for the ground station.
While the BG-250 is designed as a FPV racing drone, you don't have to use it for that. Thanks to its fantastic gyro stablised flight controller, the CC3D, the BG-250 is as happy flying slowly as it is quickly. So if you just want something to learn to fly with it, the BG-250 will suit you fine. Equally, if you are more into acrobatics, simply turn off the auto stabilisation and you will be able to do flips and rolls.
Racing drones and crashing go hand in hand, it's part of the sport, but you needn't worry. As racing drones don't weigh a lot, they don't carry a lot of inertia. Most crashes just result in a broken prop, which are very cheap to replace and can be fixed in seconds. As it happens the kit even comes with a spare set of props; you get one full set of nylon props, one full set of carbon fibre props. The BG-250's frame is very strong and can survive a lot, but if you do find yourself crashing into an oak tree and needing a spare part, we can supply spares as we deal directly with DYS.
- Factory Assembled (A-RTF)
- H-Style 250 Class Racing Frame
- High Quality, Lightweight Carbon Fibre Construction
- Heli-style Durable Landing Gear
- Integrated PCB with Built-In LEDs
- CC3D Gyro Stabilised FC
- Package Includes Carbon Fibre/Nylon Prop Sets and Spare Fixings
Integrated PCB central plate with built-in voltage regulator and power filter
The bottom plate has all the circuitry built-in, so there are no messy wires between the CC3D flight controller and the ESCs. It also features a built-in voltage-regulated power supply which has four 5V outputs and one 12V output, allowing you to easily power your FPV gear. Finally, the integrated XT60 battery connector makes attaching and disconnecting your battery quick and easy.
Integrated LED lights
The frame features very bright green and red LEDs to help you see it when flying in low light, and also to easily distinguish its orientation.
DYS BG-250 Gallery
- Transmitter & Receiver (6 channel recommended)
- Battery 3S 1300-2400mAH
- Mini USB Male Cable
Setup and Software:
- Size: 225mmx204mmx65mm
- Construction: 2mm Carbon Fibre
- Frame Weight: 130g
- Total Weight: 275g
DYS BE1806 2300KV motor:
- Stator Diameter:23mm
- Stator Length:18.5mm
- Shaft Diameter:2.0mm
- Motor Dimensions(Dia.xLen):Φ23×18.5mm
- Weight (g):18g
- No.of Cells(Lipo):3-4S
- Max Continuous current(A):7.6A
- Max Continuous Power(W):84.4W
- Signal frequency: 20-500Hz
- Outout PWM frequency: 18KHz
- Application: BLHeli firmware
CC3D Flight Controller:
- MultiRotor controller with auto-level, including TriCopters, QuadCopters and HexaCopters
- Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer
- Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac and Linux
- Direct high speed USB support with no drivers required, a truly plug and play device.
- Spektrum satellite receiver support
- Futaba S-BUS hardware support and PPM
- Innovative Flexi-port technology for superior port flexibility
- 16Mbits on-board EEPROM for configuration storage
- 5030 5x3 Nylon Prop Set
- 5030 5x3 Carbon Fibre Prop Set
- BG-250 Frame (Factory Assembled)
- 4x DYS BE1806 2300kv Motor
- 4x DYS mini 20A with BLHeli firmware
- 1x CC3D Flight Controller with RX cable
- 5x3 Nylon and Carbon Fibre Prop Sets
- Spare Fixing Screws
Sorry, we don't currently have any product related advice for this item. For general tips, tutorials and help please check out our Multirotor Beginner's Guide. Alternatively feel free to ask us a question.
COVID-19: We are still shipping out orders daily, but have changed our same day shipping cut-off time to 1PM to help cope with demand. If an order is placed after 1PM we will still do our best to ship same day as our daily postal collection is around 4:15.
Please be aware that deliveries with Royal Mail are taking longer to get through. At the moment we are finding it can range from next day to even up to two weeks, with 3-5 days being typical. So if you choose Royal Mail as a shipping method please be patient, shipments aren’t going missing they are just taking a while to get through the postal service. For fast deliveries we recommend choosing DHL.
All information relating to shipping and delivery is stated here. Should you not find what you are looking for, please contact us.
Shipping costs are calculated once items have been placed in your basket during checkout.
UK Postage: Here at Flying Tech we process orders Monday to Friday and pride ourselves on our quick turnaround of orders. If stocks levels allow, we aim to dispatch orders placed before 4PM the same day with Royal Mail. Our cut off time for courier delivery is earlier; orders must be placed by 1PM for next day delivery with DHL and 1PM for next day delivery with APC. A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.
We are partnered with several delivery companies including Royal Mail, DHL, APC and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us. For small low value orders our cheapest delivery service is Royal Mail First Class; this service aims to deliver the next working day including Saturdays and it can be sent recorded for extra peace of mind – please note this is not a guaranteed next day delivery or trackable service.
For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options. Royal Mail Special Delivery will arrive by 1PM the next day and for an extra fee can be delivered on Saturdays. APC Overnight offers next day delivery with full tracking and a 2hr time slot pre-delivery text notification. DHL is a good option for larger consignments and remote locations such as Northern Ireland and Isle of Man. All high value orders are fully insured and will likely require a signature on delivery.
FREE shipping in the UK on orders over £99 (this is a signed for service and insured to a maximum of £40). Please note that the offer only applies to orders with a total weight under 1Kg and that a few products are exempt from the offer, such as LiPo batteries.
International Postage: We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the weight and shipment location, the price is quoted during the checkout. Low value order can be sent by Air Mail, but are not insured. Higher value, heavy goods will be sent with DHL or an alternative courier. Orders shipped outside the UK may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.
For our international customers who require a rapid delivery we off a DHL Express service. DHL Express offers NEXT DAY delivery to most European destinations and a very fast delivery for countries further afield, generally 2-3 days. For country specific estimated transit times, please refer this download.
We reserve the right to modify, remove or add to any of these services at any time. We endeavour to ship all items as fast as possible. If you would like an alternative shipping arrangement to be made please contact us.