CW Quick Release Prop Adapter - TL68B42
£4.00 |
Price |
We ship worldwide - Same day shipping on all orders placed before 4pm - FREE delivery on UK orders over £99 <1kg*
£4.00 |
Price |
Quick release prop adapters are a great upgrade for any multirotor. The obvious benefit is being able to quickly remove large propellers to make transportation easier and protect your props from damage; but there are other reasons to use them to.
We've all read the warnings instructing us to remove propellers before connecting your drone to the computer for configuration, and sometimes never bothered to. Well with quick release prop adapters there's no excuse. The props can be removed in seconds without using any tools, leaving you free to setup you multirotor without the risk of spinning props.
Additionally, by being able to quickly change props, means you can easily adapt your platform to carry different payloads.
These Tarot quick release prop adapters are sold individually, as CW (clockwise) or CCW (counterclockwise) adapters - the direction referring to the corresponding motor spin direction. For a quadcopter you will need to order four adapters, two CW and two CCW.
The adapters are available in four colour options, so it might make sense to have one colour for the CW adapters and another for the CCW adapters. That way, you’ll be able to easily distinguish them.
With the quick release prop adapter plate installed, fixing your props can literally be completed in a few seconds. Simply attach by spinning the props onto their corresponding motors. They are self-tightening, but we recommend that you make sure they are secured by locking them up by hand.
The adapters are designed for used with direct mount props (4mm shaft), but they can also be used with traditional hub type propellers by mounting a shaft prop adapter to the quick release prop adapter - compatible with M3 12mm hole spacings.
Compatible with Direct Mount (T-Syle) Prop Adapters
Compatible with Traditional Shaft Type Prop Adapters
Prop Adapter Dimensions and Mounting Holes (M3x12mm)
Included:
Included:
Included:
Included:
Included:
Included:
Included:
Included:
None Available
Sorry, we don't currently have any product related advice for this item. For general tips, tutorials and help please check out our Multirotor Beginner's Guide. Alternatively feel free to ask us a question.
All information relating to shipping and delivery is stated here. Should you not find what you are looking for, please contact us.
Shipping costs are calculated once items have been placed in your basket during checkout.
UK Postage: Here at Flying Tech we process orders Monday to Friday and pride ourselves on our quick turnaround of orders. If stocks levels allow, we aim to dispatch orders placed before 4PM the same day with Royal Mail. Our cut off time for courier delivery is earlier; orders must be placed by 1PM for next day delivery with DHL and 1PM for next day delivery with APC. A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.
We are partnered with several delivery companies including Royal Mail, DHL, APC and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us. For small low value orders our cheapest delivery service is Royal Mail First Class; this service aims to deliver the next working day including Saturdays and it can be sent recorded for extra peace of mind – please note this is not a guaranteed next day delivery or trackable service.
For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options. Royal Mail Special Delivery will arrive by 1PM the next day and for an extra fee can be delivered on Saturdays. APC Overnight offers next day delivery with full tracking and a 2hr time slot pre-delivery text notification. DHL is a good option for larger consignments and remote locations such as Northern Ireland and Isle of Man. All high value orders are fully insured and will likely require a signature on delivery.
FREE shipping in the UK on orders over £99 (this is a signed for service and insured to a maximum of £40). Please note that the offer only applies to orders with a total weight under 1Kg (volumetric) and that a few products are exempt from the offer, such as LiPo batteries.
International Postage: We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the weight and shipment location, the price is quoted during the checkout. Low value order can be sent by Air Mail, but are not insured. Higher value, heavy goods will be sent with DHL or an alternative courier. Orders shipped outside the UK may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.
For our international customers who require a rapid delivery we off a DHL Express service. DHL Express offers NEXT DAY delivery to most European destinations* and a very fast delivery for countries further afield, generally 2-3 days. For country specific estimated transit times, please refer this download.
We reserve the right to modify, remove or add to any of these services at any time. We endeavour to ship all items as fast as possible. If you would like an alternative shipping arrangement to be made please contact us.
![]() |
![]() |
![]() |
![]() |
![]() |
*Next day delivery is not guaranteed, it's a delivery aim.
Comments
Compatibility
Dear Sir or Madam:
I have Tarot 5008 340 KV motors and want to know if these are compatible and safe since I have read that the inertia during slowing down/speeding up can lead to pro detachment issues.....any information, please?
Best regards and many thanks in advance!
Chris
Hi Chris,
Hi Chris,
I've been using these adapters for a while now and never had any detachment issues. I always make sure I locked them up by hand before taking off.
William
Compatible with Turnigy D2830 Motors
Hey Flyingtech
I am looking for Turnigy D2830 prop adapters with self-tightening and have had a hard time finding any that fits my motors. For the specs I read, these should fit the spacing of the mounting holes, but the hole size on my motors is M2, not M3.
Do you have any experience in mouting this on motors with M2 screws instead of M3? Would it be good enough to use a washer and M2 screws?
The motor specification of my motors can be seen here: https://hobbyking.com/media/file/860948386X166487X41.jpg
Hope you can help. :)
Best Regards
Frederik
Sorry, I don't think it would
Sorry, I don't think it would work. The shaft on your motor is too tall meaning the prop adapter wouldn't sit down. Also you really need to use M3.
Thanks for the quick answer
Thank you for the quick answer. :)
The prop-shaft isn't an issue as I have removed it to fit the current prop-adapter. It was mainly the M3 hole that concerned me. I'll keep looking then, or investigate if I could use a bushing to fill out the M3 hole with the M2 screw. :)
Bushing could work, obviously
Bushing could work, obviously it's very important the the prop adapter is mounted centrally.
Add new comment