FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment


We ship worldwide - Same day shipping on all orders placed before 4pm - FREE delivery on UK orders over £99 <1kg*


MATEK HUBOSD ECO STOSD8 OSD & PDB X-TYPE WITH XT060

Matek Systems HUBOSD eco X-Type w/STOSD8 (OSD), Current Sensor and Dual BEC - 5S Max

£19.90
Price
Brand: 
Collection: 
AttachmentSize
PDF icon Manual11.25 MB
Image icon Fake / Real1.18 MB
SKU:
PDB-HUBOSD-ECOX

The Matek HUBOSD eco X-Type PCB is a multifunctional HUB with 4 channel PDB, dual BECs, a current sensor and a plug and play integrated OSD.

The PDB can provide power up to four ESCs rated at 30A per channel and compatible with 3 to 5S LiPo batteries. The BEC outputs provide 5volts at 2A and 12volts at 0.5A. The 5V BEC connection is ideal for powering your flight controller or RC receiver. The 12v BEC is a linear type regulator so no LC filter is needed to clean up the power supply if used for a 12V FPV camera. 

The built-in STOSD8 (OSD) is integrated into the PDB and therefore super easy to use as it doesn't rely on a connection to you FC; it's totally independent. It supports lots of functions including auto battery cell detection, low voltage alarm, current draw, automatic flight timer, onscreen pilot ID and more. The OSD function can be used without any programming, but if you wish to change any of the default settings or enable functions for example the pilot ID, there is a very simple GUI - download here (you will need a FTDI USB programmer).

The PDB is well designed with corner mounted ESC power connections for a neat installation and a sided mounted XT60 power connector.

The HUBOSD Eco PDB is also available in an H configuration - HUBOSD eco H-Type.

Genuine Matek Product - beware of fakes.

Features:

  • Built-in STOSD8-SE - plug and play OSD
  • Current sensor 140A max
  • 2oz copper, 4-layers & 2mm PCB
  • 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 10V outputs
  • Camera signal and ground pads, video transmitter signal and ground pads
  • 1x Serial port (RX, TX, G)
  • With XT60 connector

STOSD8 

  • Autodetect PAL/NTSC - Auto sense PAL / NTSC cam at OSD startup.
  • Dynamic on screen info - Basic info for flight. More info after landing.
  • Automatic flight timer - Trigger but a current >2A.
  • Automatic cell detection - STOSD detects the cell numbers automatically when the LiPo is connected.
  • Low voltage alarm - Auto battery alarm blinks the battery voltage when pack voltage hits the low limit.
  • Exceeding mAh alarm - Auto capacity alarm blinks the mAh when capacity exceed the setting. Default is 1000mAh.
  • Min.voltage & Max.current recorder - Current less than 2A & keep 5 seconds. Min.Voltage & Max.current will be shown on screen.
  • Onscreen Pilot ID - Default Pilot ID is disable. you can enable it in GUI.
  • Firmware upgradable - Firmware upgradable to ensure any user can enjoy any new features that we might release the future.
  • Plug & Play - You can use it with default firmware & settings. No PC connection needed if you don’t want to change the settings.
  • Simple GUI - No complicated settings.

STOSD8 Tool & ECO H X Type Updates

Thread & Discussion on RCGroup

Matek HUBOSD ECO X PDB with Current Sensor, Dual BEC, XT60Matek HUBOSD ECO PDBMatek HUBOSD ECO Power BoardMatek HUBOSD ECO Current SensorMatek HUBOSD ECO PDB Racing DroneMatek HUBOSD ECO PDB PartsMatek HUBOSD8-SE OSD Info

General

  • Input voltage range: 8 - 21VDC(3~5s LiPo) w/ TVS protection
  • Regulated 5V and 12V outputs
  • Current Rating: 4X30A (Max.4x35A)
  • Current sensor: 140A
  • Current signal output: 3.3V ADC for Flight controler
  • Built-in STOSD8
  • 51x36x4mm, 9g
  • Mounting holes 30.5mm Ø3mm

BEC 12V Outputs

  • Linear regulator, very low noise. LC Filter is needless.
  • Designed for Video TX or FPV camera.
  • Voltage: 12.0 +/- 0.3VDC (4~5S operation)
  • Continuous current: 500mA@16V IN, 400mA@20V IN
  • Short-circuit tolerant (2 seconds/minute)
  • If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V

BEC 5V Outputs

  • Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • DC/DC synchronous buck regulator.
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 2 Amps (Max.2.5A 10s/minute)
  • Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
  • Short-circuit tolerant (5 seconds/minute)

STOSD8 

  • Autodetect PAL/NTSC
  • Dynamic on screen info
  • Automatic flight timer
  • Automatic cell detection
  • Low battery alarm
  • Exceeding mAh alarm
  • Min.voltage & Max.current recorder
  • Onscreen Pilot ID
  • Firmware upgradable
  • Simple GUI & setting
  • Plug & Play

Included:

  • Matek HUBOSD eco X-Type
  • Nylon mounting fixtures
  • Capacitor

None Available

Comments

By Sander (not verified) on

Hi,

I purchased this item "Matek Systems HUBOSD eco X-Type w/STOSD8 (OSD), Current Sensor and Dual BEC - 5S Max" from you a while ago. Could you please advise how to attach the yellow power connector onto the PCB board? I tried soldering, but the solder does not stick on the material at the connection, which lead me to speculate they are meant to be assembled with a different method.

Thank you.

Kind regards,

Sander

By admin on

Hi, soldering is the correct method. You need a solder that flows nicely and you might find that you need a soldering iron with more wattage.

Add new comment

Sorry, we don't currently have any product related advice for this item. For general tips, tutorials and help please check out our Multirotor Beginner's Guide. Alternatively feel free to ask us a question.

UK Express Shipping - Next Day Delivery on orders placed before 4pm


All information relating to shipping and delivery is stated here. Should you not find what you are looking for, please contact us.

Shipping costs are calculated once items have been placed in your basket during checkout. 

UK Postage: Here at Flying Tech we process orders Monday to Friday and pride ourselves on our quick turnaround of orders. If stocks levels allow, we aim to dispatch orders placed before 4PM the same day with Royal Mail. Our cut off time for courier delivery is earlier; orders must be placed by 1PM for next day delivery with DHL and 1PM for next day delivery with APC. A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.

We are partnered with several delivery companies including Royal Mail, DHL, APC and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us. For small low value orders our cheapest delivery service is Royal Mail First Class; this service aims to deliver the next working day including Saturdays and it can be sent recorded for extra peace of mind – please note this is not a guaranteed next day delivery or trackable service.

For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options. Royal Mail Special Delivery will arrive by 1PM the next day and for an extra fee can be delivered on Saturdays. APC Overnight offers next day delivery with full tracking and a 2hr time slot pre-delivery text notification. DHL is a good option for larger consignments and remote locations such as Northern Ireland and Isle of Man. All high value orders are fully insured and will likely require a signature on delivery.

FREE shipping in the UK on orders over £99 (this is a signed for service and insured to a maximum of £40). Please note that the offer only applies to orders with a total weight under 1Kg (volumetric) and that a few products are exempt from the offer, such as LiPo batteries.

We Ship Worldwide

International Postage: We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the weight and shipment location, the price is quoted during the checkout. Low value order can be sent by Air Mail, but are not insured. Higher value, heavy goods will be sent with DHL or an alternative courier. Orders shipped outside the UK may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.

Flying Tech International Shipping with DHL Express

For our international customers who require a rapid delivery we off a DHL Express service. DHL Express offers NEXT DAY delivery to most European destinations* and a very fast delivery for countries further afield, generally 2-3 days. For country specific estimated transit times, please refer this download.

We reserve the right to modify, remove or add to any of these services at any time. We endeavour to ship all items as fast as possible. If you would like an alternative shipping arrangement to be made please contact us.

Our Delivery Partners:
Royal Mail DHL APC Deutsche Post Parcel Force

*Next day delivery is not guaranteed, it's a delivery aim.