FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment


We ship worldwide - Same day shipping on all orders placed before 4pm - FREE delivery on UK orders over £99 <1kg*


FlySky FS-i6X 10CH Transmitter & FS-X6B 2.4GHz iBUS PPM Telemetry Receiver (Mode 2)

FlySky FS-i6X 10CH Transmitter & FS-X6B 2.4GHz iBUS PPM Telemetry Receiver (Mode 2)

£55.00
Price

In Stock

Collection: 
Downloads: 
AttachmentSize
PDF icon Manual7.04 MB
PDF icon Quick Start Guide3.51 MB
SKU:
TX/RX-FS-i6X-X6B

We often get asked, 'what transmitter do you recommend for someone getting into multirotors' and we always reply the FlySky FS-i6X. As radios go, it ticks all of the boxes and much more. Sure, it's not a really expensive big brand radio like a Futaba, JR or Spectrum, but why pay more, often for features you won't use when the FS-i6X is more than capable for most applications.

The FS-i6X is the upgraded version of the FS-i6, which is a radio that has been around for several years and stood the test of time with a popular following providing lots of related YouTube videos for support. This FS-i6X version of the i6 retains the original form factor of the i6, but adds support for a 10 channel receiver via a firmware upgrade, whereas the i6 only supports 6 channels.

The FlySky FS-i6X includes all of the important features and programmable parameters to support helicopters, gliders, airplanes and of course multirotors. It even has the ability to store 20 models allowing the user to save a whole fleet of aircraft. For the racing drone pilots out there, you'll benefit from its three-position switch for setting flight modes and its iBus / Sbus support for quick and easy installations. It even has a telemetry capability. As standard the LCD display shows real time receiver voltage and if you purchase the FS-CVT01 sensor, flight battery voltage can be monitored too.

The transmitter comes with the FlySky’s FS-X6B which is a dual antenna receiver. Best still it arrives pre-bound so you can literally be up and running in minutes. It also has the added benefit that the board, which measures 36x22mm has 30.5mm mounting holes so it can be added to an FC stack. While the X6B receiver has traditional PWM channels output, it also supports iBus, SBUS and PPM. The advantage of these Rx protocols over traditional PWM channels is that you only need to use one signal wire rather than one for each PWM channel.

Programmable radios with seemingly endless and complicated menus can be a little intimidating for beginners, not this one. The FS-i6X is very easy and intuitive to program. It is implemented with simple push buttons, allowing quick and easy menu navigation and manipulation. It features a large easy to read LCD display which is even backlit, while its simplified menus will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you're making.

The transmitter employs FlySky’s latest 2A AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz advanced technology, with built in multiple channel coding and error correction for superior reliability while extending the transmission distance. It is also equipped with a super active and passive anti-jamming capability and has very low power consumption with high receiver sensitivity. The 2.4GHz system puts the radio out of the frequency range by any “noise” generated by other electronic components in your model such as the brushless motor, speed controller, servos, or other metal to metal noise. This eliminates interference and glitching that can plague a traditional radio system. For those with older FlySky receivers, the i6X is backwards compatible with the original AFHDS system too.

Best still, the build quality and general feel of the FS-i6X matches the great performance of the radio. Its slim casing ergonomically fits your hands, while the adjustable length control sticks are nicely weighted and smooth, with a feel similar to that of the more expensive Japanese radios. The radio also features a large carrying handle and a neat built-in antenna, which is less prone to breakage than traditional antennas. Even small details such as the position of the strap hook have been considered; it's located spot on the balance point of the radio.

All in all the FlySky FS-i6X represents great value for money, boasting an excellent control interface and super features making it the perfect choice for multirotor pilots.

Features:

  • 10 channel 2.4GHz radio with telemetry capability
  • Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology
  • Transmitters comes pre-bound to receiver
  • Multiple control switches including a 3-pos switch and two potentiometers
  • Easy to use and program
  • 20 model memory
  • Trainer port
  • Backlit LCD screen displays real time transmitter and receiver voltage

Basic Programming Functions:

  • Dual Rates
  • Sub Trim
  • Travel Adjust
  • Channel Reverse
  • Swash Mix
  • Gyro Sensitivity
  • Throttle Curve
  • Monitor
  • Pitch Curve
  • Throttle Hold
  • Model Name
  • Timer

FS-i6X Specifications:

  • Channels: 6-10 (Default 6)
  • Model type: Fixed-Wing/Glider/Helicopter
  • Model Memories: 20
  • RF range: 2.408-2.475GHz
  • Bandwidth: 500KHz
  • Band: 135
  • RF power: less than 20 dBm
  • 2.4G system: AFHDS 2A and AFHDS
  • Code type: GFSK
  • Sensitivity: 1024
  • Display: 128*64 dot matrix with white backlight.
  • Low voltage warning: Yes (less than 4.2V)
  • DSC port: Yes (PS2; output: PPM)
  • Charger Port: No
  • Power: 6V DC (1.5AAx4 - not included)
  • Weight: 392g
  • ANT length: 26mm (dual antenna)
  • Size: 174x89x190mm
  • Certificate: CE0678, FCC
  • Mode 2 (Left Hand Throttle)

FS-X6B​ Specifications:

  • Channels: S.Bus 18 Channels, PPM 8 Channels, PWM 6 Channels
  • RF range: 2.4055 ~ 2.475 GHz
  • RF channel: 140
  • RX sensitivity: -105dBm
  • 2.4GHz system: AFHDS 2A
  • Modulation type: GFSK
  • Power input: 4.5V - 6.5 V DC
  • Antenna length: 100mm x 2
  • Size: 36 x 22 x 8 mm
  • Weight: 5g
  • Certificate: CE0678, FCC, RCM
  • i-Bus port: Yes
  • Data acquisition port: Yes
  • PPM Common port: Yes
  • Independent Port: Yes

Included:

  • 1 x FlySky FS-i6X 10CH Transmitter
  • 1x Firmware Upgrade Cable
  • 1 x FlySky FS-X6B 6-Channel Receiver
  • 1 x CD-Rom (Manual PDF file in this CD-Rom)

None Available

Add new comment

Sorry, we don't currently have any product related advice for this item. For general tips, tutorials and help please check out our Multirotor Beginner's Guide. Alternatively feel free to ask us a question.

UK Express Shipping - Next Day Delivery on orders placed before 4pm


All information relating to shipping and delivery is stated here. Should you not find what you are looking for, please contact us.

Shipping costs are calculated once items have been placed in your basket during checkout. 

UK Postage: Here at Flying Tech we process orders Monday to Friday and pride ourselves on our quick turnaround of orders. If stocks levels allow, we aim to dispatch orders placed before 4PM the same day with Royal Mail. Our cut off time for courier delivery is earlier; orders must be placed by 1PM for next day delivery with DHL and 1PM for next day delivery with APC. A confirmation email will be sent when your order has been dispatched. If you wish to change your order, please contact us promptly, as we won't be able to make amendments once the order has been shipped.

We are partnered with several delivery companies including Royal Mail, DHL, APC and Parcel Force. If you have a special delivery requirement or would like to arrange a shop collection please contact us. For small low value orders our cheapest delivery service is Royal Mail First Class; this service aims to deliver the next working day including Saturdays and it can be sent recorded for extra peace of mind – please note this is not a guaranteed next day delivery or trackable service.

For a guaranteed next day delivery we recommend Royal Mail Special Delivery or one of our courier delivery options. Royal Mail Special Delivery will arrive by 1PM the next day and for an extra fee can be delivered on Saturdays. APC Overnight offers next day delivery with full tracking and a 2hr time slot pre-delivery text notification. DHL is a good option for larger consignments and remote locations such as Northern Ireland and Isle of Man. All high value orders are fully insured and will likely require a signature on delivery.

FREE shipping in the UK on orders over £99 (this is a signed for service and insured to a maximum of £40). Please note that the offer only applies to orders with a total weight under 1Kg and that a few products are exempt from the offer, such as LiPo batteries.

We Ship Worldwide

International Postage: We are based in the UK, but ship to most worldwide destinations. Postage rates are calculated by the weight and shipment location, the price is quoted during the checkout. Low value order can be sent by Air Mail, but are not insured. Higher value, heavy goods will be sent with DHL or an alternative courier. Orders shipped outside the EU may be subject to customs charges. These charges are additional to any delivery costs and will need to be paid by the recipient.

Flying Tech International Shipping with DHL Express

For our international customers who require a rapid delivery we off a DHL Express service. DHL Express offers NEXT DAY delivery to most European destinations and a very fast delivery for countries further afield, generally 2-3 days. For country specific estimated transit times, please refer this download.

We reserve the right to modify, remove or add to any of these services at any time. We endeavour to ship all items as fast as possible. If you would like an alternative shipping arrangement to be made please contact us.

Our Delivery Partners:
Royal Mail DHL APC Deutsche Post Parcel Force