FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

LDARC 40MM 4 Blade Brushed Props - Rainbow Bag 10 Pairs CW / CCW (1MM HUB)

LDARC Rainbow Pack 40MM 4 Blade CW/CCW Props 1MM HUB

£7.90
Here with have a great value bumper pack of multicoloured 40MM 4 Blade Whoop Props. You get 10x CW/CCW pairs, which is equivalent to a full five sets, so you shouldn't be running out of them anytime soon. This prop fits coreless (brushed) and brushless motors with a 1mm shaft and is typically used by 75mm sized Whoops, for example the Mobula7, Beta75, Eachine Trashcan, LDARC TINY R7 7/7X, Inductrix fpv+ and Eachine M80.
Category: 
HQProps 7x4 Durable Tri-Blade Propellers Light Grey - POPO Compatible

HQProps 7x4 Durable Tri-Blade Propellers Light Grey

£4.20
Welcome the one of the newest editions to the HQProp line the HQProp 7x4x3 propeller! The 7x4x3 propeller is a great choice for pilots wanting a bigger prop for their longer distance drones, the 7x4x3 has great efficiency so no need to worry about killing your batteries right away. If you have a 7" frame this is a must have prop in your bag.  This propeller adopts POPO technology. Paired with a POPO compatible motor, they allow you to change props in seconds, without ever needing a wrench or locknut. As always, POPO propellers are backward compatible with traditional motor shafts and locknuts if you aren't utilizing the quick-swap POPO system.
Category: 
Tinywhoop Race Props

TBS Micro Brushed Race Props for Tiny Whoops (0.75MM HUB)

£3.20
The best micro race props available today! For brushed whoops. Check out these TBS Tinywhoop Race Props, they are absolutely aweosme to fly with. Quad blades to ensure grippy cornering and the fat blades for better alitude controls. They are just the perfect props to pair with your 6mm motors with 0.75mm shafts.
Brand: 
Category: 
HQProp 6X3.5X3 Light Grey PC

HQProps 6x3.5 Durable Tri-Blade Propellers Light Grey

£3.65
HQProp's 6x3.5x3 propeller is made of light yet durable polycarbonate. The mild pitch makes this prop a great choice for long range cruises and smooth flying pilots alike. This propeller adopts POPO technology. Paired with a POPO compatible motor, they allow you to change props in seconds, without ever needing a wrench or locknut. As always, POPO propellers are backward compatible with traditional motor shafts and locknuts if you aren't utilizing the quick-swap POPO system.
Category: 
Self Lock 9444 Propeller Set

DJI Style Self-Tightening 9 inch 9444 Propeller Set CW/CCW

£3.95
These self tightening propellers are a great upgrade for the DJI Phantom 1 - 3 and just about any other multi-rotor that uses motors with 6MM threaded shafts. These propellers are more rigid than the original 9443 props used on the Phantom 2, providing higher efficiency and less flex in the blade tips. Additionally, the increased pitch provides more thrust when compared to the original Phantom 2 prop. The props are available in a range of eye-catching colours, which can be used to help distinguish between the front and rear of the drone. This set includes one counter clockwise and one clockwise propeller. Compatible with:  DJI Phantom 1 DJI Phantom FC40 DJI Phantom 2 DJI Phantom 2 Vision DJI Phantom 2 Vision DJI Phantom 3 Professional / Advanced 6MM Threaded Motor Shafts
Brand: 
Category: 
DAL Cyclone Propellers with Support for POPO Quick Swap

DAL Cyclone Propellers with Support for POPO Quick Swap

£3.25
As pilots continue to squeeze every ounce of power out of their quads, many have realized they can fit props slightly larger than their reported arm size. You might wonder why there have been more 5.1 and 5.2 inch props out there lately and it's because many frames can clear them. This extra bit of length can make a significant difference in the power and handling of your quad. Be sure to check each frame as one 5" frame may be able to fit different props compared to another 5" frame.  DALProp has been a mainstay in the prop industry for a long time, and their Cyclone series is well known as some of the most dependable props on the market. This new Prop from Dal is also compatible with POPO® ("Pop On, Pop Off") motors. POPO is a innovative quick swap system that enables mounting props to brushless drone motors in seconds with the push of a button, without the need for a prop nut and wrench. The props are also compatible with regular motors and M5 prop nuts.
Brand: 
Category: 
DAL T7056C Cyclone Propellers - Crystal Clear

DAL T7056C Cyclone Propellers - Crystal Clear

£3.49
With hundreds of thousands of sets sold each month, the Cyclone line of props is the go to choice for most FPV pilots. DAL has now released a 7" propeller for all those large quads out there that need a little more bite in their props than many other 7" props with a lower pitch provide. The 7" Cyclone features specialised geometry for large diameter blades, giving it steady thrust. It's perfect for endurance / long range quads, 7" quads or low KV 6S setups. Like all other DalProps this blade is made of a high quality, flexible and durable plastic that can easily survive crashes and tree clips.
Brand: 
Category: 

Pages

Subscribe to RSS - Propellers