FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

Color: 
#A8A8A8
Multirotor Motor CW Bolt-On Prop Adapter - M5 (Three Hole)

Motor Mount & CW Bolt-On Prop Adapter M5 (Three Hole)

£4.50
Please note: Our current stock includes a prop spinner instead of a M5 nut. This is a replacement bolt-on style prop adapter / motor mount commonly used by lots of multirotor motors. The prop adapter has a M5 CW thread and attaches to the motor using three M2 screws with 12mm spacing’s. The motor mount has countersunk m3 fixing holes with 16mm spacing’s. Compatible with the DYS BE2212-13.
Category: 
Multirotor Direct Mount TM propeller Adapter M3 - 12MM

Multirotor Direct Mount TM propeller Adapter M3 - 12MM

£4.25
This is a replacement direct mount style prop adapter commonly used by lots of multirotor motors, for example the Tarot 4006, the DYS D4215-21 and widely used by the T Motors range. The adapter is designed for used with direct mount TM props, which use two M3 holes, 12mm spacings. Please note colour may vary (Black / Silver).
Quantity Discount: 
Quantity12 - 45 - 99
Price£4.25£4.00£3.50
Category: 
Low Profile M5 CW Lock Nut - Red

Low Profile M5 Aluminium Prop Lock Nut - CW / CCW (1pc)

£1.20
These are a low profile version of our popular aluminium lock nuts, measuring 4.5mm tall in comparison to the regular ones which measure 6mm. They will fit a M5 thread, which is common to most racing drone motors. We sell both clockwise (CW) and counterclockwise (CCW) versions - most prop adapters use a CW thread. They are available in a range of anodised colours, so you can mix and match them to customise your airframe CW thread: Red, Orange, Pink, Green, Blue, Light Blue, Purple, Gold, Silver, Black, Titanium CCW thread: Black Compatible with most racing drone motors Low profile, flanged lock nut (4.5mm high) Lightweight less than 1g each.  5mm coarse 0.8 thread pitch M3 lock nuts are available here. We also sell a prop nut wrench to secure these locking nuts. Low Profile M5 Lock Nut - 4.5mm (left) / Standard M5 Lock Nut - 6mm (Right)
Category: 
Black Drone Lock Nut

M5 Aluminium Anodised Prop Lock Nut - CW / CCW (1pc)

£0.95
Never have a prop come loose again with these high quality alloy M5 lock nuts. They will fit a M5 thread, which is common to most racing drone motors. We sell both clockwise (CW) and counterclockwise (CCW) versions - most prop adapters use a CW thread. They are available in a range of anodised colours, so you can mix and match them to customise your airframe, note that black is CCW and the other colours are CW. CW thread: Red, Pink, Green, Blue, Purple, Gold, Silver & Orange CCW thread: Black Compatible with most racing drone motors Flanged lock nut (6mm high) Lightweight less than 1g each.  5mm coarse 0.8 thread pitch M3 lock nuts are available here. We also sell a prop nut wrench to secure these locking nuts. We also have available a low profile version of the M5 lock nuts Left: Low Profile Lock Nut (4.5m high) / Right: Standard Nut (6mm high)
Brand: 
Category: 
Gold CW Quick Release Prop Adapter - TL68B38

Quick Release Self Tightening Tarot Prop Adapter CW & CCW

£4.00
Quick release prop adapters are a great upgrade for any multirotor. The obvious benefit is being able to quickly remove large propellers to make transportation easier and protect your props from damage; but there are other reasons to use them to. We've all read the warnings instructing us to remove propellers before connecting your drone to the computer for configuration, and sometimes never bothered to. Well with quick release prop adapters there's no excuse. The props can be removed in seconds without using any tools, leaving you free to setup you multirotor without the risk of spinning props. Additionally, by being able to quickly change props, means you can easily adapt your platform to carry different payloads. These Tarot quick release prop adapters are sold individually, as CW (clockwise) or CCW (counterclockwise) adapters - the direction referring to the corresponding motor spin direction. For a quadcopter you will need to order four adapters, two CW and two CCW. The adapters are available in four colour options, so it might make sense to have one colour for the CW adapters and another for the CCW adapters. That way, you’ll be able to easily distinguish them. With the quick release prop adapter plate installed, fixing your props can literally be completed in a few seconds. Simply attach by spinning the props onto their corresponding motors. They are self-tightening, but we recommend that you make sure they are secured by locking them up by hand. The adapters are designed for used with direct mount props (4mm shaft), but they can also be used with traditional hub type propellers by mounting a shaft prop adapter to the quick release prop adapter - compatible with M3 12mm hole spacings. Compatible with Direct Mount (T-Syle) Prop Adapters Compatible with Traditional Shaft Type Prop Adapters Prop Adapter Dimensions and Mounting Holes (M3x12mm)
Brand: 
Category: 
M5 CW/CCW Self-Locking Prop Adpaters for DYS BE1806 Motor

5MM CW/CCW Self-Locking Prop Adapters for DYS BE1806 Motor

£6.50
As standard the DYS BE1806 motor comes with a 5mm CW prop adapter. This is fine for your CW spinning motors, as it will be self-tightening due to the rotation of the motor. For the CCW spinning motors the story is very different; the rotation can cause the prop spinner to become loose with obvious consequences. This is solved by tightening down the prop spinner or by using a M5 locking nut, neither ideal. This prop adapter upgrade kit solves the problem. It has CW and CCW prop adapters, so both will be self-locking. The adapter is designed for use with the DYS BE1806 & DYS BE 2204 motor, but it's compatible with many other small high-KV motors. The adapter has M2 fixing holes spaced 19mm apart. Tip: To make sure you have the correct adapter for the motor, hold the spinner still and turn the motor in its spin direction by hand. If the spinner tightens onto the shaft, it is the correct one for the motor.
Brand: 
Category: 
Subscribe to RSS - Prop Adapters