FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

MATEK HUBOSD ECO STOSD8 OSD & PDB X-TYPE WITH XT060

Matek HUBOSD ECO X PDB with Current Sensor, Dual BEC, XT60

£19.90

The Matek HUBOSD eco X-Type PCB is a multifunctional HUB with 4 channel PDB, dual BECs, a current sensor and a plug and play integrated OSD.

The PDB can provide power up to four ESCs rated at 30A per channel and compatible with 3 to 5S LiPo batteries. The BEC outputs provide 5volts at 2A and 12volts at 0.5A. The 5V BEC connection is ideal for powering your flight controller or RC receiver. The 12v BEC is a linear type regulator so no LC filter is needed to clean up the power supply if used for a 12V FPV camera. 

Collection: 
Brand: 
Barcode: 
7109111374406

PROSD Mini Quad PDB with 12V / 5V BECs, LC Filter & FPV OSD

£16.99

This combined PDB / OSD is great for user that enjoy a simple setup away from a PC. The board incorporates all of the features you expect of a good quality PDB and pairs it with a straightforward OSD (On-Screen-Display) that doesn't require setup in CleanFlight or a connection with a flight controller. The OSD can be used to show battery voltage, current draw, current consumption, RSSI, flight time. It's configured and calibrated all via a simple onboard push button.

Collection: 
Barcode: 
7109118541405
SP Racing F3 OSD/PDB with 5/12V BEC, LC Filter & Current Sensor

Seriously Pro SP Racing F3 OSD PDB with 5/12V BEC & LC Filter

£25.00

SP RACING™ F3 OSD/PDB WITH BEC, CURRENT SENSOR, LC FILTER + MORE!

Brand new open-source OSD system. The stackable Seriously Pro Racing F3 OSD/PDB is packed with features to make the core of your multi-rotor system super tidy, wire free, lightweight and totally awesome! All-new firmware and all-new configuration software.

Collection: 
Brand: 
Barcode: 
7109113991045
2x Male to 1x Female XT60 Battery Lead

XT60 Y lead Parallel Battery Harness - 2x Male to 1x Female

£6.00
This XT60 2x male to 1x female battery harness can be used to connect two battery packs in parallel, for increased flight time and battery redundancy. For example, using it you can make 2 x 2200mAh 11.1v 3S1P packs into a single 4400mAh 11.1v pack 3S2. The cable is 8cm long and made of high quality 14 AWG silicone wire.
Collection: 
Barcode: 
7109118197435
Matek XT60 Quad PDB with 5V & 12V BEC Outputs (36x36mm)

Matek XT60 Quad PDB with 5V & 12V BEC Outputs (36x36mm)

£7.50

We like all of Matek's racing drone PDBs, but this has to be our favourite. It comes with an integrated XT60 power connection which not only looks the part, it stops your power cables from getting caught up in the props. We've also found it to be easy to solder and most importantly reliable.

Collection: 
Brand: 
Barcode: 
7109114717972
FPV Mini Power Distribution Board with LC Filter 5/12v BECs, Minim OSD and FTDI

Mini Power Distribution Board with LC Filter & FPV Minim OSD

£19.99

This is the mother of all power distributions boards; it's a PDB with LC filtered 5/12V Becs, OSD and a FDTI programmer all in one regular size board. It's the perfect PDB for anyone building a FPV racing quadcopter, it includes all of the functions you'll need and will help to keep everything neat and tidy.

Collection: 
Barcode: 
7109119743129
Matek 5 in 1 LED & Power Hub V2

Matek 5 in 1 LED & Power Hub V2 PDB with 5/12V BEC & Buzzer

£12.00

This has to be the ultimate power distribution board (PDB) for any mini quad. It's much more than just a simple PDB, it's better described as a power hub. It has both 5v and 12v regulated BECs, a LED light controller and even lost plane finder & low voltage alarm functions.

Collection: 
Brand: 
Barcode: 
7109118260450

Pages

Subscribe to RSS - Power Distribution