FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

5050 Racing Drone Tail Light with Mount

Programmable Cleanflight 5V LED Board & Tail Light Mount

£9.00

LEDs look great at night and they can be useful to help with orientation even in the day. Maybe more useful still, you can use programmable LEDs like this RGB WS2812B light board to indicate flight data. By using different colours, you can program the Naze32 and CC3D flight controllers running Cleanflight to indicate things such as: directional control inputs, battery warnings, flight mode, thrust levels and even RSSI strength. For example, you could program a fading pattern from white to red as you throttle up, or indicator flashes for when you roll right and left.

Collection: 
Category: 
Brand: 
Barcode: 
7109118097360
Circular 5V Drone Motor Mount LED X2 (White/Red/Green/Blue)

Circular 5V Drone Motor Mount LED X2 (White/Red/Green/Blue)

£5.50

LEDs look great at night and they can be useful to help with orientation even in the daytime. LEDs also come in handy for FPV miniquad racing. Racing drones are actually quite hard to see on FPV video, especially if you are racing at full speed through a field of trees. Using LEDs is one solution to the problem. Fix a few to your drone and it will make it much easier for your mates to follow you.

Collection: 
Category: 
Brand: 
Colour: 
Barcode: 
7109116394980
3S 12V Super Bright LED Racing Drone Tail Light 120mmx12mm

3S 12V Super Bright LED Drone Tail Light 120mmx12mm

£7.50

As LEDs go, we'll be amazed if you can find brighter than these, they really are 'super bright', even in the daylight. They use next generation LEDs based on COB (Chip on Board) technology, which offers greater brightness and efficiency over traditional LEDs. Furthermore, in comparison to standard LEDs, COB LEDs don't have a casing which allows for a much denser LED array. The result is a light beam without any visible individual light points.

Collection: 
Category: 
Colour: 
Barcode: 
7109118904613
Strobon V2 Navigation Strobe Lights​ (White)

Strobon V2 Navigation Strobe Light​ (White/Red/Green/Blue)

£5.45

We rated the Strobon V1s as the best strobe lights on the market and now they have got even better. V2 Strobons are smaller, lighter and now support 5 different working pattern, including ‘blink’, ‘heartbeat’, ‘rotating beacon’, ‘static’ and of course the legendary ‘strobe’. As with the V1s, if you use more than one Strobon on the same servo channel they will synchronise, meaning all strobes will flash at the same time like a real aircraft strobe system. You can also switch them on and off remotely. The Strobons are available in four colours white, red, green and blue.

Collection: 
Category: 
Brand: 
Colour: 
Barcode: 
7109112156742
Racing Drone Super Bright LED Headlight 1.5W 12V 3S

Racing Drone Super Bright LED Headlight 1.5W 12V/3S (JST)

£5.50

Use these super bright LED headlights to make your multirotor look cool and to help with orientation too. As multirotors are mostly symmetrical, orientation can be challenging, especially for beginners. In this respect, LEDs can be used to provide a clear directional indicator. LEDs also come in handy for FPV racing. Mini quads are actually quite hard to see on standard definition FPV video, especially if you are racing at full speed through a field of trees. Bright LEDs show up really well in video, so with them, you will be able to more easily spot your competitors. 

Collection: 
Category: 
Colour: 
Barcode: 
7109111737645
Mateksys RGB Colour Switchable 16V 5050 LED Board (47x10mm)

RGB 5050 7 Colour DIP Switch 12V(3S) 16V(4S) LED Light Board

£5.00

LEDs look great at night and they can be useful to help with orientation even in the day. This little LED light board is perfect for mini quads. It contains three super bright 5050 LEDs and you can switch between seven different colours via the onboard DIP switch - no programming required, so you can even change their colour in the field. We offer 12V version of the light board suited to 3S setups and a 16V version suited to 4S setups.

Note: If you frame is conduction (e.g. carbon fibre) make sure you isolate the LED board from your frame to prevent shorting.

Collection: 
Category: 
Brand: 
Barcode: 
7109111556130
Mateksys RGB 7 Colour 5050 LED Board - WS2812B (51mmx10mm)

Programmable Cleanflight RGB WS2812B 7 Colour 5V LED Board

£5.50

LEDs look great at night and they can be useful to help with orientation even in the day. Maybe more useful still, you can use programmable LEDs like this RGB WS2812B light board to indicate flight data. By using different colours, you can program the Naze32 and CC3D flight controllers running Cleanflight to indicate battery warnings, flight mode, thrust levels and even RSSI strength. For example, you could program a fading pattern from white to red as you throttle up. If you want to keep it simple, you can set the LEDs to just sit at a solid colour.

Collection: 
Category: 
Brand: 
Barcode: 
7109118056336
3S 12V Super Bright LED Racing Drone Tail Light

3S 12V Super Bright LED Racing Drone Tail Light 50mmx20mm

£6.50

As LEDs go, we'll be amazed if you can find brighter than these, they really are 'super bright', even in the daylight. They use next generation LEDs based on COB (Chip on Board) technology, which offers greater brightness and efficiency over traditional LEDs. Furthermore, in comparison to standard LEDs, COB LEDs don't have a casing which allows for a much denser LED array. The result is a light beam without any visible individual light points.

Collection: 
Category: 
Colour: 
Barcode: 
7109116452574
Multi Colour 12 LED Circular Light Board with 3/4S JST-XH Connector

Multi Colour 12 LED Circular Light Board with 3/4S JST-XH

£9.90

As multirotors are symmetrical, orientation can be challenging. A simple solution is to attach a bright light source on your drone to give you a clear reference of its heading. This circular LED board contains 12 SMA LEDs that produce a very bright light which can be seen easily night or day.

Collection: 
Category: 
Barcode: 
7109113708285

Pages

Subscribe to RSS - Lighting