FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

Flytron Strobon 8MM PowerLED Lens

Lenses for Strobon V2 / Strobon Standalone / 8MM PowerLEDs

£0.90

These lenses are compatible with our Strobon V2 / Strobon Standalone LEDs and 8MM PowerLEDs. 

The single piece lens provides a quick and convenient means to adjust the beam angle emitted from our LEDs without the need for glue or mechanical fixings. They are simply a push fit.

Lenses: 15° 30° 45° 60° 90° 100°

Collection: 
Category: 
Brand: 
Diatone Circular Flash Bang Motor Mount 2812 RGB LED Board -  SW522/AN

Diatone Circular Flash Bang Motor Mount 2812 LED Board

£2.90

This programmable LED board from Diatone is designed to attach beneath a motor on your racing drone. It has M3 hole cut outs that will suit 18XX / 22XX sized motors, typically anything used by a 5" racing quad. As the board features addressable 5 volt 2812 LEDs, you can programmed it via BetaFlight / Cleanflight to do lots of interesting things like flashing colour patterns to reflect arming status, flight modes, braking, battery status and so on. Alternatively if you prefer a solid colour you can set it up to do that too.

Collection: 
Category: 
Brand: 
Diatone SW604 Flash Bang 2812 RGB Programmable LED Board

Diatone Flash Bang 2812 RGB Programmable LED Boards

£6.90

Here we have Diatone's Flash Bang Series of 2812 Addressable LED Boards which are perfect to fit to the rear of your racing quad. There are available in a variety of sizes to suit different applications. All of the variants use 2812 5volt RGB LEDs which can be programmed via BetaFlight / Cleanflight. If you just want to keep it simple you can assign a solid colour. Alternatively you can do lots of interesting things like programming flashing colour patterns to reflect arming status, flight modes, braking, battery status and so on.

Collection: 
Category: 
Brand: 
Diatone 3-4S LED Light Board Set White, Red, Green & Blue

Diatone 3-4S LED Light Board Set White, Red, Green & Blue

£6.00

Here we have a set of LED light boards that are ideal for racing drones. They are the perfect size for mounting onto the arms of your race quad and they are really bright too. 

The light boards are very simple to use. There’s no programming involved so all you need to do is provide power, they are compatible with 3S(11.1V) / 4S(14.8V). They come as a set of four, including a board of each colour: White, Red, Green and Blue. The light boards come as a single PCB, but they can be broken apart if you want to mount them individually.

Collection: 
Category: 
Brand: 
Flexible WS2812 LED Light Strip

Flexible WS2812 Programmable 2020 LED Light Strip - 5V

£5.50

Everyone like to customise their quad, so why not add some programmable LEDs to personalise it and really stand out from the crowd! This WS2812 light strip consists of 10 individual RGB 2020 LEDs on a flexible PCB. The light strip is a good size for most racing drones, but it can be cut on the white lines to fit or even cut into separate units if required. It also comes with 3M sticky tape to mount it.

Collection: 
Category: 

Matek 2812 LED Controller for Racing Drones 2-6S with 5V BEC

£7.99

If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately - here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel). 

Collection: 
Category: 
Brand: 
Matek 2812 Arm Light 4X / 6X RGB LEDs for Racing Drones

Matek 2812 Arm Light 4X / 6X RGB LEDs for Racing Drones

£7.99

These RGB LED strips are an ideal size for adding to the arms of your racing drone or even an FPV wing. They are designed to work with the Matek 2812 LED Controller for a plug and play setup, but they are also compatible directly with a BetaFlight controller.

Collection: 
Category: 
Brand: 
Dynam Airplane LED Controller with Red & Green LED Light Set

Dynam Airplane LED Controller with Red & Green LED Light Set

£9.90

Add nav lighting to your airplane easily with this plug and play lighting set from Dynam. Included is an LED driver module and 5 pre-wired LEDs: 2 red and 3 green. The LED driver has two output channels, a channel programmed to flash for 3 LEDs and an output programmed for solid for 2 LEDs. The set is easily powered by plugging it into a 5V radio receiver.

Dynam Airplane LED Controller with Red & Green LED Light Set

Collection: 
Category: 
Brand: 
RC LED Light Bar Controller with 4x JST Outputs 3S - 6S

LED Light Bar Controller with 4CH JST Outputs & RC Control

£8.90

This is a LED bar light controller that is capable of controlling up to 4 LED strips at once. Wiring is simple, there are four power outputs for your LEDs and a balance lead plug for connecting directly with a 3S/4S/6S battery (please select version as required) to power the LEDs. Finally use the attached servo cable to plug the controller directly into your receiver/flight controller.

The controller supports four working modes and these are remotely controlled via your radio transmitter.

Collection: 
Category: 

Pages

Subscribe to RSS - Lighting