FlyingTech.co.uk Site Logo

 

 

Specialist in Multirotor Tech & FPV Equipment

Fossils Stuff Gravity FSGX FPV Racing Drone 210 Quad Frame

£69.00
New FSGX 210 The latest frame from Fossil Stuff Is this the best looking Fossil Frame yet, we think so! It's available in 5 colour options (the orange and purple combo is our favourite) and like all of the Gravity Frames, it's made out of crash resistant HDPE. The frame is made up of three pieces and has been designed around specific components to keep the frame compact and everything enclosed. It even comes with a 3D printed GoPro / RunCam camera mount. The FSGX 210 Racing Frame has been CNC machined to the highest tolerances from three pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Limited Lifetime Frame Warranty* Available in a range of 5 colours the FSGX 210 has been designed around specific components keeping the frame as compact as possible and everything enclosed.   Recommended components are as follows:  Naze 32 Rev 5. Direct soldering is recommended 2200 series motors with 5” props Up to 24 amp ESC’s including the Kiss 24A race edition CC3D Power Distribution Board or similar RunCam Swift FPV camera or similar Skyzone TS5823/S, Aomway Mini AV, Luminier and other VTX transmitters will fit  A GoPro or RunCam/Mobius mount is included with the frame in a similar colour to your frame colour choice. Please choose your preferred mount in the options drop down menu before checking out.   Also available for this frame is an optional Battery Tray with mounting kit.   Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Top Cover.   Main Features: FPV camera protection Main components are fully enclosed Motor protection Air slots in Mainframe, Mid Cover and Top Cover to keep ESC’s totally cool. Integrated XT60 connector Accessible VTX dip switches from window in Top Cover (GoPro mount only) FPV camera bracket mounting holes pre-drilled Multiple Battery strap slots Motor ventilation holes Flight Controller USB access Pre-drilled mounting holes for Flight Controller and PDB Quick access to internal components Large airflow slots in motor arms Machined channels in arms for motor wires Central COG with 4S 1.5ah lipo battery The Top Cover can be easily removed and re-fitted with only 4 x M3 screws allowing quick and easy access to the inside. The Limited Lifetime Frame Warranty* covers any part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced once only on return of the warranty certificate and the damaged part/s. Replaced frames will have a unique identification. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe and Top Cover. Warranty is transferable.
Collection: 
Barcode: 
7109116160745
Gravity 250-22 FPV Racing Frame - Blue

Fossils Stuff Gravity 250-22 FPV Racing Drone 250 Quad Frame

£79.00
The Gravity 250-22 is a frame based on the original Gravity 250. This frame will accommodate the larger 2200 series motors. The Gravity 250-22 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty* The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows:  Naze 32 Rev 5 with horizontally soldered header pins 2200 series motors with 5” props Little Bee FVT 20A Pro ESC CC3D Power Distribution Board or similar (36mmx36mm) Skyzone TS5823 VTX  Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Top Cover.   Main Features: FPV camera protection Motor protection Accessible VTX dip switches from window in Top Cover Lipo balance lead socket Battery strap slots Rubber battery grip pad included Motor ventilation holes LED rear bumper for 8 programmable LED’s Naze 32 LED indicator window Naze 32 pre-drilled mounting holes CC3D PDB pre-drilled holes Large airflow slots in motor arms Machined channels in arms for motor wires Pre-drilled Top Cover for Fossils Stuff Active Tilt Mechanism (ATM) Central COG with 3S 1.3ah lipo battery The Top Cover can be easily removed and re-fitted with only 4 M3 screws allowing quick and easy access to the inside. The Lifetime Frame Warranty* covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe and Top Cover. Holes may be drilled in Top Cover for VTX antenna and LED wire route at rear of mainframe. No other modifications may be carried out. KIT / A-RTF Gravity 250 Available Soon. Flight Case for Gravity 250 - available here.
Collection: 
Barcode: 
7109115253721
Red Fossil Frame

Fossils Stuff Gravity 180 FPV Racing Drone Mini Quad Frame

£64.00
The Gravity 180 FPV Racing frame has been CNC machined to the highest tolerances from four pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty* The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows:  Naze 32 with ESC connections hard wired 1806 and 2200 series motors with 4” props Little Bee FVT 20A Pro ESC CC3D Power Distribution Board or similar (36mmx36mm) VTX Sony HS1177 FPV Camera  Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Top Cover.   Main Features: FPV camera protection Motor protection Accessible VTX dip switches from window in Top Cover Integrated XT60 connector supplied Battery protection Motor ventilation holes LED rear bumper for 5 programmable LED’s Naze 32 Rev 5 and Rev 6 USB access Naze 32 pre-drilled mounting holes Large airflow slots in motor arms Machined channels in arms for motor wires Central COG with 4S 1.5 ah lipo battery The Top Cover can be easily removed and re-fitted with only 4 x M3 screws allowing quick and easy access to the inside. The Lifetime Frame Warranty* covers any part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe, Battery Tray, Mid Cover  and Top Cover. Holes may be drilled in Top Cover for VTX antenna and LED wire route at rear of mainframe. No other modifications may be carried out. The carbon fibre tubes and 45mm bolts retaining the battery tray are not covered under the warranty.
Collection: 
Barcode: 
7109111534176
Subscribe to RSS - Fossils Stuff