This is a 2.4Ghz 16-Channel receiver with S.Bus port and compatible with Futaba FASST protocol, so you can bind it with your Futaba T8FG / 10CG / 14SG transmitter and others. It’s very small and light (4.5g) making it ideally suited to FPV mini quad racers like the Tarot 130. Despite it’s tiny size, its still a full range receiver, boasting diversity antennas. It has an SBUS output which is compatible with the Naze32 Rev.6 and new F3 flight controllers like the SP F3.
Compatibility:
The Rx is compatible with 2.4Ghz FASST radios (7CH Mode / Multi Mode), like the Futaba 14SG. 8 Channel FHSS version available here.
Binding with a transmitter:
1. Turn on Transmitter.
2. Connect the battery to the receiver while pressing receiver is F/S button.
3. The LED on the receiver will change to solid green, it indicates the binding is completed and successful
How to switch between HS mode and FS Mode:
- HS:High Speed
- FS:Fast Speed
Turn the transmitter off, connect the battery to the receiver, press the F/S button of receiver for 6 seconds and then release. The red LED will flash fast in HS Mode and slow in FS Mode. Repeat to alternate modes.
WARNING: HS mode is only applied for high-speed digital servos. Other servos should select FS mode.
Reviews
Clear filtersThere are no reviews yet.